fix front-end requirement of umb-checkbox

Fixes binding of FormDataCollection for GET requests which fixes the …

.editorconfig

@@ -13,4 +13,5 @@ indent_size = 4
 
 # Trim trailing whitespace, limited support.
 # https://github.com/editorconfig/editorconfig/wiki/Property-research:-Trim-trailing-spaces
-trim_trailing_whitespace = true
+trim_trailing_whitespace = true
+csharp_prefer_braces = false : none

.github/CODE_OF_CONDUCT.md

@@ -0,0 +1,32 @@
+# Code Of Conduct
+ 
+Our informal code of conduct concentrates on the values we, as Umbraco HQ, have set for ourselves and for our community. We expect you to be a friend. 
+Instead of listing out all the exact "do's" and "don't's" we want to challenge you to think about our values and apply them:
+
+If there's a need to talk to Umbraco HQ about anything, please make sure to send a mail to [Sebastiaan Janssen - sj@umbraco.dk](mailto:sj@umbraco.dk).
+
+## Be a Friend
+
+We welcome and thank you for registering at Our Umbraco. Find below the values that govern Umbraco and which you accept by using Our Umbraco.
+
+## Trust
+
+Assume positive intent and try to understand before being understood.
+
+## Respect
+
+Treat others as you would like to be treated.
+
+This also goes for treating the HQ with respect. For example: don’t promote products on [our.umbraco.com](https://our.umbraco.com) that directly compete with our commercial offerings which enables us to work for a sustainable Umbraco.
+
+## Open
+
+Be honest and straightforward. Tell it as it is. Share thoughts and knowledge and engage in collaboration.
+
+## Hungry
+
+Don't rest on your laurels and never accept the status quo. Contribute and give back to fellow Umbracians.
+
+## Friendly
+
+Don’t judge upon mistakes made but rather upon the speed and quality with which mistakes are corrected. Friendly posts and contributions generate smiles and builds long lasting relationships.

.github/CONTRIBUTING.md

@@ -0,0 +1,97 @@
+_Looking for Umbraco version 8? [Click here](https://github.com/umbraco/Umbraco-CMS/blob/dev-v8/.github/V8_GETTING_STARTED.md) to go to the v8 branch_
+# Contributing to Umbraco CMS
+
+👍🎉 First off, thanks for taking the time to contribute! 🎉👍
+
+The following is a set of guidelines for contributing to Umbraco CMS.
+
+These are mostly guidelines, not rules. Use your best judgment, and feel free to propose changes to this document in a pull request.
+
+Remember, we're a friendly bunch and are happy with whatever contribution you might provide. Below are guidelines for success that we've gathered over the years. If you choose to ignore them then we still love you 💖.
+
+## Contributing code changes
+
+This document gives you a quick overview on how to get started, we will link to in-depth documentation throughout if you need some more background info.
+
+
+## Guidelines for contributions we welcome
+
+Not all changes are wanted, so on occassion we might close a PR without merging it. We will give you feedback why we can't accept your changes and we'll be nice about it, thanking you for spending your valuable time.
+
+We have [documented what we consider small and large changes](CONTRIBUTION_GUIDELINES.md). Make sure to talk to us before making large changes.
+
+Remember, if an issue is in the `Up for grabs` list or you've asked for some feedback before you sent us a PR, your PR will not be closed as unwanted.
+
+## How do I begin?
+
+Great question! The short version goes like this:
+
+  * **Fork** - create a fork of [`Umbraco-CMS` on GitHub](https://github.com/umbraco/Umbraco-CMS)
+
+  ![Fork the repository](img/forkrepository.png)
+
+  * **Clone** - when GitHub has created your fork, you can clone it in your favorite Git tool
+  
+  ![Clone the fork](img/clonefork.png)
+
+  * **Build** - build your fork of Umbraco locally as described in [building Umbraco from source code](BUILD.md)
+  * **Change** - make your changes, experiment, have fun, explore and learn, and don't be afraid. We welcome all contributions and will [happily give feedback](#questions)
+  * **Commit** - done? Yay! 🎉 It is recommended to create a new branch now and name it after the issue you're fixing, we usually follow the format: `temp-12345`. This means it's a temporary branch for the particular issue you're working on, in this case `12345`
+  * **Push** - great, now you can push the changes up to your fork on GitHub
+  * **Create pull request** - exciting! You're ready to show us your changes (or not quite ready, you just need some feedback to progress). GitHub has picked up on the new branch you've pushed and will offer to create a Pull Request. Click that green button and away you go.
+
+  ![Create a pull request](img/createpullrequest.png)
+
+### Further reading
+
+At this point you might want to [read on about contributing in depth](CONTRIBUTING_DETAILED.md). 
+
+### Reviews
+
+You've sent us your first contribution, congratulations! Now what?
+
+The [pull request team](#the-pr-team) can now start reviewing your proposed changes and give you feedback on them. If it's not perfect, we'll either fix up what we need or we can request you to make some additional changes.
+
+We have [a process in place which you can read all about](REVIEW_PROCESS.md). The very abbreviated version is:
+
+- Your PR will get a reply within 48 hours
+- An in-depth reply will be added within at most 2 weeks
+- The PR will be either merged or rejected within at most 4 weeks
+- Sometimes it is difficult to meet these timelines and we'll talk to you
+
+## Styleguides
+
+To be honest, we don't like rules very much. We trust you have the best of intentions and we encourage you to create working code. If it doesn't look perfect then we'll happily help clean it up.
+
+That said, the Umbraco development team likes to follow the hints that ReSharper gives us (no problem if you don't have this installed) and we've added a `.editorconfig` file so that Visual Studio knows what to do with whitespace, line endings, etc.
+
+## The PR team
+
+The pull request team consists of a member of Umbraco HQ, [Sebastiaan](https://github.com/nul800sebastiaan), who gets assistance from the following community members
+
+- [Anders Bjerner](https://github.com/abjerner)
+- [Dave Woestenborghs](https://github.com/dawoe)
+- [Emma Burstow](https://github.com/emmaburstow)
+- [Poornima Nayar](https://github.com/poornimanayar)
+
+These wonderful volunteers will provide you with a first reply to your PR, review and test out your changes and might ask more questions. After that they'll let Umbraco HQ know if everything seems okay. 
+
+## Questions?
+
+You can get in touch with [the PR team](#the-pr-team) in multiple ways, we love open conversations and we are a friendly bunch. No question you have is stupid. Any questions you have usually helps out multiple people with the same question. Ask away:
+
+- If there's an existing issue on the issue tracker then that's a good place to leave questions and discuss how to start or move forward
+- Unsure where to start? Did something not work as expected? Try leaving a note in the ["Contributing to Umbraco"](https://our.umbraco.com/forum/contributing-to-umbraco-cms/) forum, the team monitors that one closely
+
+## Code of Conduct
+
+This project and everyone participating in it is governed by the [our Code of Conduct](CODE_OF_CONDUCT.md). By participating, you are expected to uphold this code. Please report unacceptable behavior to [Sebastiaan Janssen - sj@umbraco.dk](mailto:sj@umbraco.dk).
+
+
+## Contributing to Umbraco, in depth
+
+There are other ways to contribute, and there's a few more things that you might be wondering about. We will answer the [most common questions and ways to contribute in our detailed documentation](CONTRIBUTING_DETAILED.md).
+
+## Credits
+
+This contribution guide borrows heavily from the excellent work on [the Atom contribution guide](https://github.com/atom/atom/blob/master/CONTRIBUTING.md). A big [#h5yr](http://h5yr.com/) to them!

.github/CONTRIBUTING_DETAILED.md

@@ -1,17 +1,11 @@
-# Contributing to Umbraco CMS
+# Contributing in detail
 
-👍🎉 First off, thanks for taking the time to contribute! 🎉👍
+There's more than one way to contribute to Umbraco, there's some more suggestions below.
 
-The following is a set of guidelines for contributing to Umbraco CMS.
-
-These are mostly guidelines, not rules. Use your best judgment, and feel free to propose changes to this document in a pull request.
-
-Remember, we're a friendly bunch and are happy with whatever contribution you might provide. Below are guidelines for success that we've gathered over the years. If you choose to ignore them then we still love you 💖. 
+When contributing code to Umbraco there's plenty of things you'll want to know, skip down to [What should I know before I get started](#what-should-i-know-before-i-get-started) for the answers to your burning questions.
 
 #### Table Of Contents
 
-[Code of Conduct](#code-of-conduct)
-
 [How Can I Contribute?](#how-can-i-contribute)
   * [Reporting Bugs](#reporting-bugs)
   * [Suggesting Enhancements](#suggesting-enhancements)
@@ -24,34 +18,25 @@ Remember, we're a friendly bunch and are happy with whatever contribution you mi
   * [Working with the source code](#working-with-the-source-code)
   * [What branch should I target for my contributions?](#what-branch-should-i-target-for-my-contributions)
   * [Building Umbraco from source code](#building-umbraco-from-source-code)
-  
-[How do I even begin?](#how-do-i-even-begin)
-
-[Problems?](#problems)
-
-[Credits](#credits)
-
-## Code of Conduct
-
-This project and everyone participating in it is governed by the [our Code of Conduct](CODE_OF_CONDUCT.md). By participating, you are expected to uphold this code. Please report unacceptable behavior to [Sebastiaan Janssen - sj@umbraco.dk](mailto:sj@umbraco.dk).
+  * [Keeping your Umbraco fork in sync with the main repository](#keeping-your-umbraco-fork-in-sync-with-the-main-repository)
 
 ## How Can I Contribute?
 
 ### Reporting Bugs
 This section guides you through submitting a bug report for Umbraco CMS. Following these guidelines helps maintainers and the community understand your report 📝, reproduce the behavior 💻 💻, and find related reports 🔎.
 
-Before creating bug reports, please check [this list](#before-submitting-a-bug-report) as you might find out that you don't need to create one. When you are creating a bug report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](ISSUE_TEMPLATE.md), the information it asks for helps us resolve issues faster.
+Before creating bug reports, please check [this list](#before-submitting-a-bug-report) as you might find out that you don't need to create one. When you are creating a bug report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](https://github.com/umbraco/Umbraco-CMS/issues/new/choose), the information it asks for helps us resolve issues faster.
 
 > **Note:** If you find a **Closed** issue that seems like it is the same thing that you're experiencing, open a new issue and include a link to the original issue in the body of your new one.
 
 ##### Before Submitting A Bug Report
 
-  * Most importantly, check **if you can reproduce the problem** in the [latest version of Umbraco](https://our.umbraco.org/download/). We might have already fixed your particular problem.
+  * Most importantly, check **if you can reproduce the problem** in the [latest version of Umbraco](https://our.umbraco.com/download/). We might have already fixed your particular problem.
   * It also helps tremendously to check if the issue you're experiencing is present in **a clean install** of the Umbraco version you're currently using. Custom code can have side-effects that don't occur in a clean install.
   * **Use the Google**. Whatever you're experiencing, Google it plus "Umbraco" - usually you can get some pretty good hints from the search results, including open issues and further troubleshooting hints.
   * If you do find and existing issue has **and the issue is still open**, add a comment to the existing issue if you have additional information. If you have the same problem and no new info to add, just "star" the issue.
 
-Explain the problem and include additional details to help maintainers reproduce the problem. The following is a long description which we've boiled down into a few very simple question in the issue tracker when you create a new issue. We're listing the following hints to indicate that the most successful reports usually have a lot of this ground covered:
+Explain the problem and include additional details to help maintainers reproduce the problem. The following is a long description which we've boiled down into a few very simple questions in the issue tracker when you create a new issue. We're listing the following hints to indicate that the most successful reports usually have a lot of this ground covered:
 
   * **Use a clear and descriptive title** for the issue to identify the problem.
   * **Describe the exact steps which reproduce the problem** in as many details as possible. For example, start by explaining which steps you took in the backoffice to get to a certain undesireable result, e.g. you created a document type, inherting 3 levels deep, added a certain datatype, tried to save it and you got an error.
@@ -67,26 +52,24 @@ Provide more context by answering these questions:
 
 Include details about your configuration and environment:
 
-  * **Which version of Umbraco are you using?** 
+  * **Which version of Umbraco are you using?**
   * **What is the environment you're using Umbraco in?** Is this a problem on your local machine or on a server. Tell us about your configuration: Windows version, IIS/IISExpress, database type, etc.
   * **Which packages do you have installed?**
 
 ### Suggesting Enhancements
 
-This section guides you through submitting an enhancement suggestion for Atom, including completely new features and minor improvements to existing functionality. Following these guidelines helps maintainers and the community understand your suggestion 📝 and find related suggestions 🔎.
+This section guides you through submitting an enhancement suggestion for Umbraco, including completely new features and minor improvements to existing functionality. Following these guidelines helps maintainers and the community understand your suggestion 📝 and find related suggestions 🔎.
 
 Most of the suggestions in the [reporting bugs](#reporting-bugs) section also count for suggesting enhancements.
 
 Some additional hints that may be helpful:
 
   * **Include screenshots and animated GIFs** which help you demonstrate the steps or point out the part of Umbraco which the suggestion is related to.
-  * **Explain why this enhancement would be useful to most Umbraco users** and isn't something that can or should be implemented as a [community package](https://our.umbraco.org/projects/).
+  * **Explain why this enhancement would be useful to most Umbraco users** and isn't something that can or should be implemented as a [community package](https://our.umbraco.com/projects/).
 
 ### Your First Code Contribution
 
-Unsure where to begin contributing to Umbraco? You can start by looking through [these `Up for grabs` and issues](http://issues.umbraco.org/issues/U4?q=%28project%3A+%7BU4%7D+Difficulty%3A+%7BVery+Easy%7D+%23Easy+%23Unresolved+Priority%3A+Normal+%23Major+%23Show-stopper+State%3A+-%7BIn+Progress%7D+sort+by%3A+votes+Affected+versions%3A+-6.*+Affected+versions%3A+-4.*%29+OR+%28tag%3A+%7BUp+For+Grabs%7D+%23Unresolved+%29).
-
-The issue list is sorted by total number of upvotes. While not perfect, number of upvotes is a reasonable proxy for impact a given change will have.
+Unsure where to begin contributing to Umbraco? You can start by looking through [these `Up for grabs` and issues](https://issues.umbraco.org/issues?q=&project=U4&tagValue=upforgrabs&release=&issueType=&search=search) or on the [new issue tracker](https://github.com/umbraco/Umbraco-CMS/issues?q=is%3Aopen+is%3Aissue+label%3Acommunity%2Fup-for-grabs).
 
 ### Pull Requests
 
@@ -95,15 +78,19 @@ The most successful pull requests usually look a like this:
   * Fill in the required template
   * Include screenshots and animated GIFs in your pull request whenever possible.
   * Unit tests, while optional are awesome, thank you!
-  * New code is commented with documentation from which [the reference documentation](https://our.umbraco.org/documentation/Reference/) is generated
+  * New code is commented with documentation from which [the reference documentation](https://our.umbraco.com/documentation/Reference/) is generated
 
-Again, these are guidelines, not strict requirements. 
+Again, these are guidelines, not strict requirements.
+
+## Making changes after the PR was opened
+
+If you make the corrections we ask for in the same branch and push them to your fork again, the pull request automatically updates with the additional commit(s) so we can review it again. If all is well, we'll merge the code and your commits are forever part of Umbraco!
 
 ## Styleguides
 
 To be honest, we don't like rules very much. We trust you have the best of intentions and we encourage you to create working code. If it doesn't look perfect then we'll happily help clean it up.
 
-That said, the Umbraco development team likes to follow the hints that ReSharper gives us (no problem if you don't have this installed) and we've added a `.editorconfig` file so that Visual Studio knows what to do with whitespace, line endings, etc. 
+That said, the Umbraco development team likes to follow the hints that ReSharper gives us (no problem if you don't have this installed) and we've added a `.editorconfig` file so that Visual Studio knows what to do with whitespace, line endings, etc.
 
 ## What should I know before I get started?
 
@@ -127,57 +114,50 @@ There's two big areas that you should know about:
 
 To find the general areas of something you're looking to fix or improve, have a look at the following two parts of the API documentation.
 
-  * [The AngularJS based backoffice files](https://our.umbraco.org/apidocs/ui/#/api) (to be found  in `src\Umbraco.Web.UI.Client\src`)
-  * [The rest](https://our.umbraco.org/apidocs/csharp/)
+  * [The AngularJS based backoffice files](https://our.umbraco.com/apidocs/ui/#/api) (to be found  in `src\Umbraco.Web.UI.Client\src`)
+  * [The rest](https://our.umbraco.com/apidocs/csharp/)
 
 ### What branch should I target for my contributions?
 
 We like to use [Gitflow as much as possible](https://jeffkreeftmeijer.com/git-flow/), don't worry if you are not familiar with it. The most important thing you need to know is that when you fork the Umbraco repository, the default branch is set to something, usually `dev-v7`. Whatever the default is, that's where we'd like you to target your contributions.
 
-![What branch do you want me to target?](tools/contributing/defaultbranch.png)
+![What branch do you want me to target?](img/defaultbranch.png)
 
 ### Building Umbraco from source code
 
+In order to build the Umbraco source code locally, first make sure you have the following installed.
+
+  * Visual Studio 2017 v15.3+
+  * Node v10+ (Installed via `build.bat` script. If you already have it installed, make sure you're running at least v10)
+  * npm v6.4.1+ (Installed via `build.bat` script. If you already have it installed, make sure you're running at least v6.4.1)
+
 The easiest way to get started is to run `build.bat` which will build both the backoffice (also known as "Belle") and the Umbraco core. You can then easily start debugging from Visual Studio, or if you need to debug Belle you can run `gulp dev` in `src\Umbraco.Web.UI.Client`. See [this page](BUILD.md) for more details.
 
-Alternatively, you can open `src\umbraco.sln` in Visual Studio 2017 ([the community edition is free](https://www.visualstudio.com/thank-you-downloading-visual-studio/?sku=Community&rel=15) for you to use to contribute to Open Source projects). In Visual Studio, find the Task Runner Explorer (in the View menu under Other Windows) and run the build task under the gulpfile.
+Alternatively, you can open `src\umbraco.sln` in Visual Studio 2017 (version 15.3 or higher, [the community edition is free](https://www.visualstudio.com/thank-you-downloading-visual-studio/?sku=Community&rel=15) for you to use to contribute to Open Source projects). In Visual Studio, find the Task Runner Explorer (in the View menu under Other Windows) and run the build task under the gulpfile.
 
-![Gulp build in Visual Studio](tools/contributing/gulpbuild.png)
+![Gulp build in Visual Studio](img/gulpbuild.png)
 
 After this build completes, you should be able to hit `F5` in Visual Studio to build and run the project. A IISExpress webserver will start and the Umbraco installer will pop up in your browser, follow the directions there to get a working Umbraco install up and running.
 
-## How do I even begin?
+### Keeping your Umbraco fork in sync with the main repository
 
-Great question! The short version goes like this:
+We recommend you sync with our repository before you submit your pull request. That way, you can fix any potential merge conflicts and make our lives a little bit easier.
 
-  * **Fork** - create a fork of [`Umbraco-CMS` on GitHub](https://github.com/umbraco/Umbraco-CMS)
+Also, if you've submitted a pull request three weeks ago and want to work on something new, you'll want to get the latest code to build against of course.
 
-  ![Fork the repository](tools/contributing/forkrepository.png)
+To sync your fork with this original one, you'll have to add the upstream url, you only have to do this once:
 
-  * **Clone** - when GitHub has created your fork, you can clone it in your favorite Git tool
-  
-  ![Clone the fork](tools/contributing/clonefork.png)
+```
+git remote add upstream https://github.com/umbraco/Umbraco-CMS.git
+```
 
-  * **Build** - build your fork of Umbraco locally as described in [building Umbraco from source code](#building-umbraco-from-source-code)
-  * **Change** - make your changes, experiment, have fun, explore and learn, and don't be afraid. We welcome all contributions and will happily give feedback
-  * **Commit** - done? Yay! 🎉 It is recommended to create a new branch now and name it after the issue you're fixing, we usually follow the format: `temp-U4-12345`. This means it's a temporary branch for the particular issue you're working on, in this case `U4-12345`
-  * **Push** - great, now you can push the changes up to your fork on GitHub
-  * **Create pull request** - exciting! You're ready to show us your changes (or not quite ready, you just need some feedback to progress). GitHub has picked up on the new branch you've pushed and will offer to create a Pull Request. Click that green button and away you go.
+Then when you want to get the changes from the main repository:
 
-  ![Create a pull request](tools/contributing/createpullrequest.png)
+```
+git fetch upstream
+git rebase upstream/dev-v7
+```
 
-The Umbraco development team can now start reviewing your proposed changes and give you feedback on them. If it's not perfect, we'll either fix up what we need or we can request you to make some additional changes.
+In this command we're syncing with the `dev-v7` branch, but you can of course choose another one if needed.
 
-If you make the corrections we ask for in the same branch and push them to your fork again, the pull request automatically updates with the additional commit(s) so we can review it again. If all is well, we'll merge the code and your commits are forever part of Umbraco!
-
-Not all changes are wanted so on occassion we might close a PR without merging it. We will give you feedback why we can't accept your changes at this and we'll be nice about it, thanking you for spending your valueable time.
-
-Remember, if an issue is in the `Up for grabs` list or you've asked for some feedback before you send us a PR, your PR will not be closed as unwanted.
-
-## Problems?
-
-Did something not work as expected? Try leaving a note in the ["Contributing to Umbraco"](https://our.umbraco.org/forum/contributing-to-umbraco-cms/) forum, the team monitors that one closely!
-
-## Credits
-
-This contribution guide borrows heavily from the excellent work on [the Atom contribution guide](https://github.com/atom/atom/blob/master/CONTRIBUTING.md). A big [#h5yr](http://h5yr.com/) to them!
+(More info on how this works: [http://robots.thoughtbot.com/post/5133345960/keeping-a-git-fork-updated](http://robots.thoughtbot.com/post/5133345960/keeping-a-git-fork-updated))

.github/CONTRIBUTION_GUIDELINES.md

@@ -0,0 +1,33 @@
+# Contributing to Umbraco CMS
+
+When you’re considering creating a pull request for Umbraco CMS, we will categorize them in two different sizes, small and large.
+
+The process for both sizes is very similar, as [explained in the contribution document](CONTRIBUTING.md#how-do-i-begin).
+
+## Small PRs
+Bug fixes and small improvements - can be recognized by seeing a small number of changes and possibly a small number of new files.
+
+We’re usually able to handle small PRs pretty quickly. A community volunteer will do the initial review and flag it for Umbraco HQ as “community tested”. If everything looks good, it will be merged pretty quickly [as per the described process](REVIEW_PROCESS.md).
+
+### Up for grabs
+
+Umbraco HQ will regularly mark newly created issues on the issue tracker with the `Up for grabs` tag. This means that the proposed changes are wanted in Umbraco but the HQ does not have the time to make them at this time. These issues are usually small enough to fit in the "Small PRs" category and we encourage anyone to pick them up and help out.  
+
+If you do start working on something, make sure leave a small comment on the issue saying something like: "I'm working on this". That way other people stumbling upon the issue know they don't need to pick it up, someone already has.
+
+## Large PRs
+New features and large refactorings - can be recognized by seeing a large number of changes, plenty of new files, updates to package manager files (NuGet’s packages.config, NPM’s packages.json, etc.).  
+
+We would love to follow the same process for larger PRs but this is not always possible due to time limitations and priorities that need to be aligned. We don’t want to put up any barriers, but this document should set the correct expectations.  
+
+Please make sure to describe your idea in an issue, it helps to put in mockup screenshots or videos.  
+
+If the change makes sense for HQ to include in Umbraco CMS we will leave you some feedback on how we’d like to see it being implemented. 
+
+If a larger pull request is encouraged by Umbraco HQ, the process will be similar to what is described in the [small PRs process](#small-prs) above, we’ll get feedback to you within 14 days. Finalizing and merging the PR might take longer though as it will likely need to be picked up by the development team to make sure everything is in order. We’ll keep you posted on the progress.
+
+### Pull request or package?
+
+If it doesn’t fit in CMS right now, we will likely encourage you to make it into a package instead. A package is a great way to check out popularity of a feature, learn how people use it, validate good usability and to fix bugs.  
+
+Eventually, a package could "graduate" to be included in the CMS.  

.github/ISSUE_TEMPLATE/1_Bug.md

@@ -0,0 +1,66 @@
+---
+name: 🐛 Bug Report
+about: File a bug report, if you've discovered a problem in Umbraco.
+---
+
+A brief description of the issue goes here.
+
+<!--
+
+If you haven't yet done so, please read the "contributing guidelines"
+thoroughly. Then, proceed by filling out the rest of the details in the issue
+template below. The more details you can give us, the easier it will be for us
+to determine the cause of a problem.
+
+See: https://github.com/umbraco/Umbraco-CMS/blob/dev-v7/.github/CONTRIBUTING.md
+
+-->
+
+
+
+Reproduction
+------------
+
+If you're filing a bug, please describe how to reproduce it. Include as much
+relevant information as possible, such as:
+
+### Bug summary
+
+<!--
+    * Write a short summary of the bug
+    * Try to pinpoint it as much as possible
+    * Try to state the _actual problem_, and not just what you _think_ the
+      solution might be.
+-->
+
+### Specifics
+
+<!--
+    * Mention the URL where this bug occurs, if applicable
+    * What version of Umbraco are you using (down to the very last digit!)
+    * What browser and version you are using
+    * Please mention if you've checked it in other browsers as well
+    * Please include *full error messages* and *screenshots* if possible
+-->
+
+### Steps to reproduce
+
+<!--
+    * Clearly mention the steps to reproduce the bug
+-->
+
+### Expected result
+
+<!--
+    * What did you _expect_ that would happen on your Umbraco site?
+    * Describe the intended/desired outcome after you did the steps mentioned.
+-->
+
+### Actual result
+
+<!--
+    * What is the actual result of the above steps?
+    * Describe the behaviour of the bug
+    * Please, please include **error messages** and screenshots. They might mean
+      nothing to you, but they are _very_ helpful to us.
+-->

.github/ISSUE_TEMPLATE/2_Feature_request.md

@@ -0,0 +1,31 @@
+---
+name:  📮 Feature Request
+about: Open a feature request, if you want to propose a new feature.
+---
+
+A brief description of your feature request goes here.
+
+
+<!--
+If you want to discuss the feature you're imagining, please make sure to keep
+those discussions on the forum at https://our.umbraco.com/ (choose the
+category "Contributing to Umbraco", Umbraco HQ follows all new topics there).
+
+Once you've come to a conclusion in the discussion, feel free to propose the
+new feature here. 
+-->
+
+How can you help?
+-------------------------------
+
+<!--
+The resources (read: available time and effort) of Umbraco's core team are
+limited.
+
+If we can not work on your suggestion, please don't take it personally. Most
+likely, it's either:
+
+ - We think your idea is valid, but we can't find the time to work on it.
+ - Your idea might be better suited as a package, if it's not suitable for
+   the majority of users.
+-->

.github/ISSUE_TEMPLATE/3_Support_question.md

@@ -0,0 +1,9 @@
+---
+name: ⁉️ Support Question
+about: Having trouble with Umbraco? -> https://our.umbraco.com
+---
+
+This issue tracker is NOT meant for support questions. If you have a question,
+please join us on the forum at https://our.umbraco.com.
+
+Thanks!

.github/ISSUE_TEMPLATE/4_Documentation_issue.md

@@ -0,0 +1,9 @@
+---
+name: 📖 Documentation Issue
+about: See https://github.com/umbraco/UmbracoDocs/issues for documentation issues
+---
+
+The Umbraco documentation has its own dedicated repository. Please open your
+documentation-related issue at https://github.com/umbraco/UmbracoDocs/issues
+
+Thanks!

.github/ISSUE_TEMPLATE/5_Security_issue.md

@@ -0,0 +1,31 @@
+---
+name: 🔐 Security Issue
+about: Discovered a Security Issue in Umbraco?
+---
+
+⚠️ PLEASE DON'T DISCLOSE SECURITY-RELATED ISSUES PUBLICLY, SEE BELOW.
+
+If you have found a security issue in Umbraco, please send the details to
+security@umbraco.com and don't disclose it publicly until we can provide a fix for
+it. If you wish, we'll credit you for finding verified issues, when we release
+the patched version.
+
+❗ Please read more about how to report security issues on https://umbraco.com/security
+
+A note on "Self XSS"
+--------------------
+
+Umbraco is a CMS, that allows users to edit content on a website. As such,
+all _authenticated users_ can:
+
+ - Edit content, and (depending on the field types) insert HTML and CSS in that
+   content, with a variety of allowed attributes.
+ - Depending on the user level: Edit template files, and insert C#, HTML, CSS and
+   javascript in so on.
+ - Upload files to the site, which will become publicly available.
+
+We see these functionalities as _features_, and not as security issues. Please
+report the mentioned items only if they can be performed by non-authorized
+users, or other exploitable vulnerabilities.
+
+Thanks!

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,12 @@
+### Prerequisites
+
+- [ ] I have added steps to test this contribution in the description below
+
+If there's an existing issue for this PR then this fixes: <!-- link to the issue here! -->
+
+### Description
+<!-- A description of the changes proposed in the pull-request and how to test these changes -->
+
+
+
+<!-- Thanks for contributing to Umbraco CMS! -->

.github/README.md

@@ -0,0 +1,51 @@
+[![Build status](https://ci.appveyor.com/api/projects/status/6by6harxtxt0ocdx/branch/dev-v7?svg=true)](https://ci.appveyor.com/project/Umbraco/umbraco-cms-b2cri/branch/dev-v7)
+[![pullreminders](https://pullreminders.com/badge.svg)](https://pullreminders.com?ref=badge)
+
+_Looking for Umbraco version 8? [Click here](https://github.com/umbraco/Umbraco-CMS/tree/temp8) to go to the v8 branch_
+
+Umbraco CMS
+===========
+The friendliest, most flexible and fastest growing ASP.NET CMS, and used by more than 443,000 websites worldwide: [https://umbraco.com](https://umbraco.com)
+
+[![ScreenShot](img/vimeo.png)](https://vimeo.com/172382998/)
+
+## Umbraco CMS
+Umbraco is a free open source Content Management System built on the ASP.NET platform. Our mission is to help you deliver delightful digital experiences by making Umbraco friendly, simpler and social.
+
+## Watch an introduction video
+
+[![ScreenShot](https://shop.umbraco.com/images/whatisumbraco.png)](https://umbraco.tv/videos/umbraco-v7/content-editor/basics/introduction/cms-explanation/)
+
+## Umbraco - The Friendly CMS
+
+For the first time on the Microsoft platform, there is a free user- and developer-friendly CMS that makes it quick and easy to create websites - and a breeze to build complex web applications. Umbraco has award-winning integration capabilities and supports ASP.NET MVC or Web Forms, including User and Custom Controls, right out of the box.
+
+Umbraco is not only loved by developers, but is a content editor's dream. Enjoy intuitive editing tools, media management, responsive views, and approval workflows to send your content live.
+
+Used by more than 443,000 active websites including Carlsberg, Segway, Amazon and Heinz and **The Official ASP.NET and IIS.NET website from Microsoft** ([https://asp.net](https://asp.net) / [https://iis.net](https://iis.net)), you can be sure that the technology is proven, stable and scalable. Backed by the team at Umbraco HQ, and supported by a dedicated community of over 220,000 craftspeople globally, you can trust that Umbraco is a safe choice and is here to stay.
+
+To view more examples, please visit [https://umbraco.com/case-studies-testimonials/](https://umbraco.com/case-studies-testimonials/)
+
+## Why Open Source?
+As an Open Source platform, Umbraco is more than just a CMS. We are transparent with our roadmap for future versions, our incremental sprint planning notes are publicly accessible, and community contributions and packages are available for all to use.
+
+## Trying out Umbraco CMS
+
+[Umbraco Cloud](https://umbraco.com/cloud) is the easiest and fastest way to use Umbraco yet, with full support for all your custom .NET code and integrations. You're up and running in less than a minute, and your life will be made easier with automated upgrades and a built-in deployment engine. We offer a free 14-day trial, no credit card needed.
+
+If you want to DIY, you can [download Umbraco](https://our.umbraco.com/download) either as a ZIP file or via NuGet. It's the same version of Umbraco CMS that powers Umbraco Cloud, but you'll need to find a place to host it yourself, and handling deployments and upgrades will be all up to you.
+
+## Community
+
+Our friendly community is available 24/7 at the community hub we call ["Our Umbraco"](https://our.umbraco.com). Our Umbraco features forums for questions and answers, documentation, downloadable plugins for Umbraco, and a rich collection of community resources.
+
+## Contribute to Umbraco
+
+Umbraco is contribution-focused and community-driven. If you want to contribute back to Umbraco, please check out our [guide to contributing](CONTRIBUTING.md).
+
+## Found a bug?
+
+Another way you can contribute to Umbraco is by providing issue reports. For information on how to submit an issue report, refer to our [online guide for reporting issues](https://github.com/umbraco/Umbraco-CMS/blob/dev-v7/.github/CONTRIBUTING.md).
+
+You can comment and report issues on the [github issue tracker](https://github.com/umbraco/Umbraco-CMS/issues).
+Since [September 2018](https://umbraco.com/blog/a-second-take-on-umbraco-issue-tracker-hello-github-issues/), the old issue tracker is in read-only mode, but can still be found at [http://issues.umbraco.org](http://issues.umbraco.org).

.github/REVIEW_PROCESS.md

@@ -0,0 +1,25 @@
+# Review process
+
+You're an awesome person and have sent us your contribution in the form of a pull request! It's now time to relax for a bit and wait for our response. 
+
+In order to set some expectations, here's what happens next.
+
+## Review process
+
+You will get an initial reply within 48 hours (workdays) to acknowledge that we’ve seen your PR and we’ll pick it up as soon as we can.
+
+You will get feedback within at most 14 days after opening the PR. You’ll most likely get feedback sooner though. Then there are a few possible outcomes:
+
+- Your proposed change is awesome! We merge it in and it will be included in the next minor release of Umbraco
+- If the change is a high priority bug fix, we will cherry-pick it into the next patch release as well so that we can release it as soon as possible
+- Your proposed change is awesome but needs a bit more work, we’ll give you feedback on the changes we’d like to see
+- Your proposed change is awesome but.. not something we’re looking to include at this point. We’ll close your PR and the related issue (we’ll be nice about it!)
+
+## Are you still available?
+
+We understand you have other things to do and can't just drop everything to help us out.   
+So if we’re asking for your help to improve the PR we’ll wait for two weeks to give you a fair chance to make changes. We’ll ask for an update if we don’t hear back from you after that time.  
+
+If we don’t hear back from you for 4 weeks, we’ll close the PR so that it doesn’t just hang around forever. You’re very welcome to re-open it once you have some more time to spend on it.  
+
+There will be times that we really like your proposed changes and we’ll finish the final improvements we’d like to see ourselves. You still get the credits and your commits will live on in the git repository.

.gitignore

@@ -90,6 +90,7 @@ src/Umbraco.Web.UI.Client/[Bb]uild/*
 src/Umbraco.Web.UI.Client/[Bb]uild/[Bb]elle/
 src/Umbraco.Web.UI/[Uu]ser[Cc]ontrols/
 src/Umbraco.Web.UI.Client/src/[Ll]ess/*.css
+src/Umbraco.Web.UI.Client/vwd.webinfo
 tools/NDepend/
 
 src/Umbraco.Web.UI/App_Plugins/*
@@ -113,6 +114,7 @@ build/ApiDocs/*
 build/ApiDocs/Output/*
 src/Umbraco.Web.UI.Client/bower_components/*
 /src/Umbraco.Web.UI/Umbraco/preview
+/src/Umbraco.Web.UI/Umbraco/preview.old
 
 #Ignore Rule for output of generated documentation files from Grunt docserve
 src/Umbraco.Web.UI.Client/docs/api

CODE_OF_CONDUCT.md

@@ -1,80 +0,0 @@
-# Code of Conduct
-
-## 1. Purpose
-
-A primary goal of Umbraco CMS is to be inclusive to the largest number of contributors, with the most varied and diverse backgrounds possible. As such, we are committed to providing a friendly, safe and welcoming environment for all, regardless of gender, sexual orientation, ability, ethnicity, socioeconomic status, and religion (or lack thereof).
-
-This code of conduct outlines our expectations for all those who participate in our community, as well as the consequences for unacceptable behavior.
-
-We invite all those who participate in Umbraco CMS to help us create safe and positive experiences for everyone.
-
-## 2. Open Source Citizenship
-
-A supplemental goal of this Code of Conduct is to increase open source citizenship by encouraging participants to recognize and strengthen the relationships between our actions and their effects on our community.
-
-Communities mirror the societies in which they exist and positive action is essential to counteract the many forms of inequality and abuses of power that exist in society.
-
-If you see someone who is making an extra effort to ensure our community is welcoming, friendly, and encourages all participants to contribute to the fullest extent, we want to know.
-
-## 3. Expected Behavior
-
-The following behaviors are expected and requested of all community members:
-
-*   Participate in an authentic and active way. In doing so, you contribute to the health and longevity of this community.
-*   Exercise consideration and respect in your speech and actions.
-*   Attempt collaboration before conflict.
-*   Refrain from demeaning, discriminatory, or harassing behavior and speech.
-*   Be mindful of your surroundings and of your fellow participants. Alert community leaders if you notice a dangerous situation, someone in distress, or violations of this Code of Conduct, even if they seem inconsequential.
-*   Remember that community event venues may be shared with members of the public; please be respectful to all patrons of these locations.
-
-## 4. Unacceptable Behavior
-
-The following behaviors are considered harassment and are unacceptable within our community:
-
-*   Violence, threats of violence or violent language directed against another person.
-*   Sexist, racist, homophobic, transphobic, ableist or otherwise discriminatory jokes and language.
-*   Posting or displaying sexually explicit or violent material.
-*   Posting or threatening to post other people’s personally identifying information ("doxing").
-*   Personal insults, particularly those related to gender, sexual orientation, race, religion, or disability.
-*   Inappropriate photography or recording.
-*   Inappropriate physical contact. You should have someone’s consent before touching them.
-*   Unwelcome sexual attention. This includes, sexualized comments or jokes; inappropriate touching, groping, and unwelcomed sexual advances.
-*   Deliberate intimidation, stalking or following (online or in person).
-*   Advocating for, or encouraging, any of the above behavior.
-*   Sustained disruption of community events, including talks and presentations.
-
-## 5. Consequences of Unacceptable Behavior
-
-Unacceptable behavior from any community member, including sponsors and those with decision-making authority, will not be tolerated.
-
-Anyone asked to stop unacceptable behavior is expected to comply immediately.
-
-If a community member engages in unacceptable behavior, the community organizers may take any action they deem appropriate, up to and including a temporary ban or permanent expulsion from the community without warning (and without refund in the case of a paid event).
-
-## 6. Reporting Guidelines
-
-If you are subject to or witness unacceptable behavior, or have any other concerns, please notify a community organizer as soon as possible. Please contact Sebastiaan Janssen - [sj@umbraco.dk](mailto:sj@umbraco.dk).
-
-Additionally, community organizers are available to help community members engage with local law enforcement or to otherwise help those experiencing unacceptable behavior feel safe. In the context of in-person events, organizers will also provide escorts as desired by the person experiencing distress.
-
-## 7. Addressing Grievances
-
-If you feel you have been falsely or unfairly accused of violating this Code of Conduct, you should notify Umbraco with a concise description of your grievance. Your grievance will be handled in accordance with our existing governing policies.
-
-## 8. Scope
-
-We expect all community participants (contributors, paid or otherwise; sponsors; and other guests) to abide by this Code of Conduct in all community venues–online and in-person–as well as in all one-on-one communications pertaining to community business.
-
-This code of conduct and its related procedures also applies to unacceptable behavior occurring outside the scope of community activities when such behavior has the potential to adversely affect the safety and well-being of community members.
-
-## 9. Contact info
-
-Sebastiaan Janssen - [sj@umbraco.dk](mailto:sj@umbraco.dk)
-
-## 10. License and attribution
-
-This Code of Conduct is distributed under a [Creative Commons Attribution-ShareAlike license](http://creativecommons.org/licenses/by-sa/3.0/).
-
-Portions of text derived from the [Django Code of Conduct](https://www.djangoproject.com/conduct/) and the [Geek Feminism Anti-Harassment Policy](http://geekfeminism.wikia.com/wiki/Conference_anti-harassment/Policy).
-
-Retrieved on November 22, 2016 from [http://citizencodeofconduct.org/](http://citizencodeofconduct.org/)

LICENSE.md

@@ -1,6 +1,6 @@
 # The MIT License (MIT) #
 
-Copyright (c) 2013 Umbraco
+Copyright (c) 2013-present Umbraco
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
 

PULL_REQUEST_TEMPLATE.md

@@ -1,11 +0,0 @@
-### Prerequisites
-
-- [ ] I have written a descriptive pull-request title
-- [ ] I have linked this PR to an issue on the tracker at http://issues.umbraco.org
-
-### Description
-<!-- A description of the changes proposed in the pull-request -->
-
-
-
-<!-- Thanks for contributing to Umbraco CMS! -->

README.md

@@ -1,47 +0,0 @@
-[![Build status](https://ci.appveyor.com/api/projects/status/6by6harxtxt0ocdx/branch/dev-v7?svg=true)](https://ci.appveyor.com/project/Umbraco/umbraco-cms-b2cri/branch/dev-v7)
-
-Umbraco CMS
-===========
-The friendliest, most flexible and fastest growing ASP.NET CMS used by more than 443,000 websites worldwide: [https://umbraco.com](https://umbraco.com)
-
-[![ScreenShot](vimeo.png)](https://vimeo.com/172382998/)
-
-## Umbraco CMS
-Umbraco is a free open source Content Management System built on the ASP.NET platform. Our mission is to help you deliver delightful digital experiences by making Umbraco friendly, simpler and social.
-
-## Watch an introduction video
-
-[![ScreenShot](http://umbraco.com/images/whatisumbraco.png)](https://umbraco.tv/videos/umbraco-v7/content-editor/basics/introduction/cms-explanation/)
-
-## Umbraco - The Friendly CMS
-
-For the first time on the Microsoft platform, there is a free user and developer friendly CMS that makes it quick and easy to create websites - or a breeze to build complex web applications. Umbraco has award-winning integration capabilities and supports ASP.NET MVC or Web Forms, including User and Custom Controls, out of the box. 
-
-Umbraco is not only loved by developers, but is a content editors dream. Enjoy intuitive editing tools, media management, responsive views and approval workflows to send your content live.
-
-Used by more than 443,000 active websites including Carlsberg, Segway, Amazon and Heinz and **The Official ASP.NET and IIS.NET website from Microsoft** ([https://asp.net](https://asp.net) / [https://iis.net](https://iis.net)), you can be sure that the technology is proven, stable and scales. Backed by the team at Umbraco HQ, and supported by a dedicated community of over 220,000 craftspeople globally, you can trust that Umbraco is a safe choice and is here to stay. 
-
-To view more examples, please visit [https://umbraco.com/why-umbraco/#caseStudies](https://umbraco.com/why-umbraco/#caseStudies)
-
-## Why Open Source?
-As an Open Source platform, Umbraco is more than just a CMS. We are transparent with our roadmap for future versions, our incremental sprint planning notes are publicly accessible and community contributions and packages are available for all to use.
-
-## Trying out Umbraco CMS
-
-[Umbraco Cloud](https://umbraco.com) is the easiest and fastest way to use Umbraco yet with full support for all your custom .NET code and intergrations. You're up and running in less than a minute and your life will be made easier with automated upgrades and a built-in deployment engine. We offer a free 14 day trial, no credit card needed.
-
-If you want to DIY you can [download Umbraco](https://our.umbraco.org/download) either as a ZIP file or via NuGet. It's the same version of Umbraco CMS that powers Umbraco Xloud, but you'll need to find a place to host yourself and handling deployments and upgrades is all down to you.
-
-## Community
-
-Our friendly community is available 24/7 at the community hub we call ["Our Umbraco"](https://our.umbraco.org). Our Umbraco feature forums for questions and answers, documentation, downloadable plugins for Umbraco and a rich collection of community resources.
-
-## Contribute to Umbraco
-
-Umbraco is contribution focused and community driven. If you want to contribute back to Umbraco please check out our [guide to contributing](CONTRIBUTING.md).
-
-## Found a bug?
-
-Another way you can contribute to Umbraco is by providing issue reports. For information on how to submit an issue report refer to our [online guide for reporting issues](https://our.umbraco.org/contribute/report-an-issue-or-request-a-feature).
-
-To view existing issues, please visit [http://issues.umbraco.org](http://issues.umbraco.org).

apidocs/toc.yml

@@ -1,5 +1,5 @@
 
 - name: Umbraco.Core Documentation
-  href: https://our.umbraco.org/apidocs/csharp/api/Umbraco.Core.html
+  href: https://our.umbraco.com/apidocs/csharp/api/Umbraco.Core.html
 - name: Umbraco.Web Documentation
-  href: https://our.umbraco.org/apidocs/csharp/api/Umbraco.Web.html
+  href: https://our.umbraco.com/apidocs/csharp/api/Umbraco.Web.html

apidocs/umbracotemplate/partials/footer.tmpl.partial

@@ -7,7 +7,7 @@
       <span class="pull-right">
         <a href="#top">Back to top</a>
       </span>
-      <span>Copyright © 2016 Umbraco<br>Generated by <strong>DocFX</strong></span>
+      <span>Copyright © 2016-present Umbraco<br>Generated by <strong>DocFX</strong></span>
     </div>
   </div>
 </footer>

apidocs/umbracotemplate/partials/head.tmpl.partial

@@ -8,7 +8,7 @@
   <meta name="title" content="{{#title}}{{title}}{{/title}}{{^title}}{{>partials/title}}{{/title}} {{#_appTitle}}| {{_appTitle}} {{/_appTitle}}">
   <meta name="generator" content="docfx {{_docfxVersion}}">
   {{#_description}}<meta name="description" content="{{_description}}">{{/_description}}
-  <link rel="icon" type="image/png" href="https://our.umbraco.org/assets/images/app-icons/favicon.png">
+  <link rel="icon" type="image/png" href="https://our.umbraco.com/assets/images/app-icons/favicon.png">
   <link rel="stylesheet" href="{{_rel}}styles/docfx.vendor.css">
   <link rel="stylesheet" href="{{_rel}}styles/docfx.css">
   <link rel="stylesheet" href="{{_rel}}styles/main.css">

apidocs/umbracotemplate/styles/main.css

@@ -63,7 +63,7 @@ a:focus {
 }
 
 .navbar-header .navbar-brand {
-    background: url(https://our.umbraco.org/assets/images/logo.svg) left center no-repeat;
+    background: url(https://our.umbraco.com/assets/images/logo.svg) left center no-repeat;
     background-size: 40px auto;
     width:50px;
 }

build.bat

@@ -9,6 +9,6 @@ IF ERRORLEVEL 1 (
 
 :error
 ECHO.
-ECHO Can not run build\build.ps1.
+ECHO Cannot run build\build.ps1.
 ECHO If this is due to a SecurityError then please refer to BUILD.md for help!
 ECHO.

build/InstallGit.cmd

@@ -1,63 +0,0 @@
-@ECHO OFF
-SETLOCAL
-REM SETLOCAL is on, so changes to the path not persist to the actual user's path
-
-git.exe --version
-IF %ERRORLEVEL%==9009 GOTO :trydefaultpath
-REM OK, DONE
-GOTO :EOF
-
-:trydefaultpath
-PATH=C:\Program Files (x86)\Git\cmd;C:\Program Files\Git\cmd;%PATH%
-git.exe --version
-IF %ERRORLEVEL%==9009 GOTO :showerror
-REM OK, DONE
-GOTO :EOF
-
-:showerror
-ECHO Git is not in your path and could not be found in C:\Program Files (x86)\Git\cmd nor in C:\Program Files\Git\cmd
-SET /p install=" Do you want to install Git through Chocolatey [y/n]? " %=%
-IF %install%==y (
-	:: Create a temporary batch file to execute either after elevating to admin or as-is when the user is already admin
-	ECHO @ECHO OFF > "%temp%\ChocoInstallGit.cmd"
-	ECHO SETLOCAL >> "%temp%\ChocoInstallGit.cmd"
-	ECHO ECHO Installing Chocolatey first >> "%temp%\ChocoInstallGit.cmd"
-	ECHO @powershell -NoProfile -ExecutionPolicy Bypass -Command "iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))" >> "%temp%\ChocoInstallGit.cmd"
-	ECHO SET PATH=%%PATH%%;%%ALLUSERSPROFILE%%\chocolatey\bin >> "%temp%\ChocoInstallGit.cmd"
-	ECHO choco install git -y >> "%temp%\ChocoInstallGit.cmd"
-	
-	GOTO :installgit
-) ELSE (
-	GOTO :cantcontinue
-)
-
-:cantcontinue
-ECHO Can't complete the build without Git being in the path. Please add it to be able to continue.
-GOTO :EOF
-
-:installgit
-pushd %~dp0
-    :: Running prompt elevated
-
-:: --> Check for permissions
->nul 2>&1 "%SYSTEMROOT%\system32\cacls.exe" "%SYSTEMROOT%\system32\config\system"
-
-:: --> If error flag set, we do not have admin.
-IF '%errorlevel%' NEQ '0' (
-    GOTO UACPrompt
-) ELSE ( GOTO gotAdmin )
-
-:UACPrompt
-    ECHO You're not currently running this with admin privileges, we'll now try to execute the install of Git through Chocolatey after elevating to admin privileges
-    ECHO Set UAC = CreateObject^("Shell.Application"^) > "%temp%\getadmin.vbs"
-    ECHO UAC.ShellExecute "%temp%\ChocoInstallGit.cmd", "", "", "runas", 1 >> "%temp%\getadmin.vbs"
-	
-    "%temp%\getadmin.vbs"
-    EXIT /B
-	
-:gotAdmin
-    IF EXIST "%temp%\getadmin.vbs" ( DEL "%temp%\getadmin.vbs" )
-    pushd "%CD%"
-    CD /D "%~dp0"
-	
-    CALL "%temp%\ChocoInstallGit.cmd"

build/Modules/Umbraco.Build/Build-UmbracoDocs.ps1

@@ -42,7 +42,7 @@ function Build-UmbracoDocs
   #get-content .\build.tmp\belle-docs.log | %{ if ($_ -match "build") { write $_}}
   
   # change baseUrl
-  $baseUrl = "https://our.umbraco.org/apidocs/ui/"
+  $baseUrl = "https://our.umbraco.com/apidocs/ui/"
   $indexPath = "$src/Umbraco.Web.UI.Client/docs/api/index.html"
   (Get-Content $indexPath).Replace("origin + location.href.substr(origin.length).replace(rUrl, indexFile)", "'$baseUrl'") `
     | Set-Content $indexPath

build/Modules/Umbraco.Build/Get-UmbracoBuildEnv.ps1

@@ -94,14 +94,14 @@ function Get-UmbracoBuildEnv
   }
   
   # ensure we have node
-  $node = "$path\node-v6.9.1-win-x86"
-  $source = "http://nodejs.org/dist/v6.9.1/node-v6.9.1-win-x86.7z"
+  $node = "$path\node-v8.12.0-win-x86"
+  $source = "http://nodejs.org/dist/v8.12.0/node-v8.12.0-win-x86.7z "
   if (-not (test-path $node))
   {
     Write-Host "Download Node..."
-    Invoke-WebRequest $source -OutFile "$path\node-v6.9.1-win-x86.7z"
-    &$sevenZip x "$path\node-v6.9.1-win-x86.7z" -o"$path" -aos > $nul
-    Remove-File "$path\node-v6.9.1-win-x86.7z"    
+    Invoke-WebRequest $source -OutFile "$path\node-v8.12.0-win-x86.7z"
+    &$sevenZip x "$path\node-v8.12.0-win-x86.7z" -o"$path" -aos > $nul
+    Remove-File "$path\node-v8.12.0-win-x86.7z"    
   }
   
   # note: why? node already brings everything we need!

build/Modules/Umbraco.Build/Umbraco.Build.psm1

@@ -376,7 +376,7 @@ function Prepare-Packages
   Copy-Files "$src\Umbraco.Web.UI\umbraco\js" "*" "$tmp\WebApp\umbraco\js"
   Copy-Files "$src\Umbraco.Web.UI\umbraco\lib" "*" "$tmp\WebApp\umbraco\lib"
   Copy-Files "$src\Umbraco.Web.UI\umbraco\views" "*" "$tmp\WebApp\umbraco\views"
-  Copy-Files "$src\Umbraco.Web.UI\umbraco\preview" "*" "$tmp\WebApp\umbraco\preview"
+
 }
 
 #

build/NuSpecs/UmbracoCms.Core.nuspec

@@ -28,7 +28,7 @@
       <dependency id="HtmlAgilityPack" version="[1.4.9.5, 2.0.0)" />
       <dependency id="Lucene.Net" version="[2.9.4.1, 3.0.0.0)" />
       <dependency id="MySql.Data" version="[6.9.9, 7.0.0)" />
-      <dependency id="ClientDependency" version="[1.9.6, 2.0.0)" />
+      <dependency id="ClientDependency" version="[1.9.7, 2.0.0)" />
       <dependency id="ClientDependency-Mvc5" version="[1.8.0.0, 2.0.0)" />
       <dependency id="AutoMapper" version="[3.3.1, 4.0.0)" />
       <dependency id="Newtonsoft.Json" version="[10.0.2, 11.0.0)" />
@@ -39,6 +39,7 @@
 	    <!-- Markdown can not be updated due to: https://github.com/hey-red/markdownsharp/issues/71#issuecomment-233585487 -->
       <dependency id="Markdown" version="[1.14.7, 2.0.0)" />
       <dependency id="System.Threading.Tasks.Dataflow" version="[4.7.0, 5.0.0)" />
+      <dependency id="System.ValueTuple" version="[4.4.0, 5.0.0)" />
     </dependencies>
   </metadata>
   <files>

build/NuSpecs/UmbracoCms.nuspec

@@ -20,6 +20,7 @@
       <dependency id="Umbraco.ModelsBuilder" version="[3.0.10, 4.0.0)" />
       <dependency id="Microsoft.AspNet.SignalR.Core" version="[2.2.1, 3.0.0)" />
 	  <dependency id="ImageProcessor.Web.Config" version="[2.3.1, 3.0.0)" />
+      <dependency id="Microsoft.CodeDom.Providers.DotNetCompilerPlatform" version="[2.0.0, 3.0.0)" />
     </dependencies>
   </metadata>
   <files>

build/NuSpecs/tools/Readme.txt

@@ -20,7 +20,7 @@ Publish this won't affect you.
 The following items will now be automatically included when creating a deploy package or publishing to the file 
 system: umbraco, umbraco_client, config\splashes and global.asax.
 
-Please read the release notes on our.umbraco.org:
-http://our.umbraco.org/contribute/releases
+Please read the release notes on our.umbraco.com:
+https://our.umbraco.com/download/releases
 
-- Umbraco
+- Umbraco

build/NuSpecs/tools/ReadmeUpgrade.txt

@@ -8,10 +8,10 @@
                                                    
 ----------------------------------------------------
 
-*** IMPORTANT NOTICE FOR 7.7 UPGRADES ***
+*** IMPORTANT NOTICE FOR UPGRADES FROM VERSIONS BELOW 7.7.0 ***
 
 Be sure to read the version specific upgrade information before proceeding:
-https://our.umbraco.org/documentation/Getting-Started/Setup/Upgrading/version-specific#version-7-7-0
+https://our.umbraco.com/documentation/Getting-Started/Setup/Upgrading/version-specific#version-7-7-0
 
 Depending on the version you are upgrading from, you may need to make some changes to your web.config
 and you will need to be aware of the breaking changes listed there to see if these affect your installation.
@@ -33,7 +33,7 @@ Publish this won't affect you.
 The following items will now be automatically included when creating a deploy package or publishing to the file 
 system: umbraco, umbraco_client, config\splashes and global.asax.
 
-Please read the release notes on our.umbraco.org:
-http://our.umbraco.org/contribute/releases
+Please read the release notes on our.umbraco.com:
+http://our.umbraco.com/contribute/releases
 
 - Umbraco

build/NuSpecs/tools/Views.Web.config.install.xdt

@@ -1,42 +1,32 @@
 <?xml version="1.0"?>
 <configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
-  <configSections>
-    <sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-		xdt:Locator="Match(name)" 
-		xdt:Transform="SetAttributes(type)">
-      <section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-		xdt:Locator="Match(name)" 
-		xdt:Transform="SetAttributes(type)" />
-      <section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-		xdt:Locator="Match(name)" 
-		xdt:Transform="SetAttributes(type)" />
-    </sectionGroup>
-  </configSections>
-  
-  <system.web.webPages.razor>
-    <host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-		xdt:Locator="Match(factoryType)" 
-		xdt:Transform="SetAttributes(factoryType)" />
-    <pages pageBaseType="System.Web.Mvc.WebViewPage">
-      <namespaces>
-		<add namespace="Umbraco.Web.PublishedContentModels" xdt:Transform="InsertIfMissing" />        
-      </namespaces>
-    </pages>
-  </system.web.webPages.razor>
-  
-  <system.web>
-      <pages
-        pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-        pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-        userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
-			xdt:Locator="Match(pageParserFilterType,pageBaseType,userControlBaseType)" 
-			xdt:Transform="SetAttributes(pageParserFilterType,pageBaseType,userControlBaseType)">
-      <controls>
-        <add assembly="System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" 
-			xdt:Locator="Match(namespace)" 
-			xdt:Transform="SetAttributes(assembly)" />
-      </controls>
-    </pages>
-  </system.web>
-  
-</configuration>
+    <configSections>
+        <sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(name)" xdt:Transform="SetAttributes(type)">
+            <section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(name)" xdt:Transform="SetAttributes(type)" />
+            <section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(name)" xdt:Transform="SetAttributes(type)" />
+        </sectionGroup>
+    </configSections>
+
+    <system.web.webPages.razor>
+        <host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(factoryType)" xdt:Transform="SetAttributes(factoryType)" />
+        <pages pageBaseType="System.Web.Mvc.WebViewPage">
+            <namespaces>
+                <add namespace="Umbraco.Web.PublishedContentModels" xdt:Transform="InsertIfMissing" />
+            </namespaces>
+        </pages>
+    </system.web.webPages.razor>
+
+    <system.web>
+        <pages
+          pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
+          pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
+          userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
+        xdt:Locator="Match(pageParserFilterType,pageBaseType,userControlBaseType)"
+        xdt:Transform="SetAttributes(pageParserFilterType,pageBaseType,userControlBaseType)">
+            <controls>
+                <add assembly="System.Web.Mvc, Version=5.2.3.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" xdt:Locator="Match(namespace)" xdt:Transform="SetAttributes(assembly)" />
+            </controls>
+        </pages>
+    </system.web>
+
+</configuration>

build/NuSpecs/tools/Web.config.install.xdt

@@ -1,419 +1,420 @@
 <?xml version="1.0"?>
 <configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
-  <configSections xdt:Transform="InsertIfMissing" />
-  <configSections>
-    <section name="BaseRestExtensions" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-    <section name="FileSystemProviders" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-    <section name="ExamineLuceneIndexSets" type="Examine.LuceneEngine.Config.IndexSets, Examine" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="SetAttributes(type,requirePermission)" />
+    <configSections xdt:Transform="InsertIfMissing" />
+    <configSections>
+        <section name="BaseRestExtensions" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+        <section name="FileSystemProviders" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+        <section name="ExamineLuceneIndexSets" type="Examine.LuceneEngine.Config.IndexSets, Examine" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="SetAttributes(type,requirePermission)" />
 
-    <sectionGroup name="applicationSettings" xdt:Locator="Match(name)">
-      <section name="umbraco.presentation.Properties.Settings" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-    </sectionGroup>
-    <sectionGroup name="system.web.webPages.razor" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-    <sectionGroup name="umbracoConfiguration" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing">
-      <section name="settings" type="Umbraco.Core.Configuration.UmbracoSettings.UmbracoSettingsSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-      <section name="BaseRestExtensions" type="Umbraco.Core.Configuration.BaseRest.BaseRestSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-      <section name="FileSystemProviders" type="Umbraco.Core.Configuration.FileSystemProvidersSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-      <section name="dashBoard" type="Umbraco.Core.Configuration.Dashboard.DashboardSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-      <section name="HealthChecks" type="Umbraco.Core.Configuration.HealthChecks.HealthChecksSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-    </sectionGroup>
-  </configSections>
+        <sectionGroup name="applicationSettings" xdt:Locator="Match(name)">
+            <section name="umbraco.presentation.Properties.Settings" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+        </sectionGroup>
+        <sectionGroup name="system.web.webPages.razor" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+        <sectionGroup name="umbracoConfiguration" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing">
+            <section name="settings" type="Umbraco.Core.Configuration.UmbracoSettings.UmbracoSettingsSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+            <section name="BaseRestExtensions" type="Umbraco.Core.Configuration.BaseRest.BaseRestSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+            <section name="FileSystemProviders" type="Umbraco.Core.Configuration.FileSystemProvidersSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+            <section name="dashBoard" type="Umbraco.Core.Configuration.Dashboard.DashboardSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+            <section name="HealthChecks" type="Umbraco.Core.Configuration.HealthChecks.HealthChecksSection, Umbraco.Core" requirePermission="false" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+        </sectionGroup>
+    </configSections>
 
-  <appSettings xdt:Transform="InsertIfMissing" />
-  <appSettings>
-    <add key="owin:appStartup" value="UmbracoDefaultOwinStartup" xdt:Locator="Match(key)" xdt:Transform="InsertIfMissing" />
-	<add key="Umbraco.ModelsBuilder.Enable" value="false" xdt:Locator="Match(key)" xdt:Transform="InsertIfMissing" />
-	<add key="Umbraco.ModelsBuilder.ModelsMode" value="Nothing" xdt:Locator="Match(key)" xdt:Transform="InsertIfMissing" />
-	<add key="umbracoDefaultUILanguage" value="en-US" xdt:Locator="Match(key)" xdt:Transform="SetAttributes(value)" />
-  </appSettings>
+    <appSettings xdt:Transform="InsertIfMissing" />
+    <appSettings>
+        <add key="owin:appStartup" value="UmbracoDefaultOwinStartup" xdt:Locator="Match(key)" xdt:Transform="InsertIfMissing" />
+        <add key="Umbraco.ModelsBuilder.Enable" value="false" xdt:Locator="Match(key)" xdt:Transform="InsertIfMissing" />
+        <add key="Umbraco.ModelsBuilder.ModelsMode" value="Nothing" xdt:Locator="Match(key)" xdt:Transform="InsertIfMissing" />
+        <add key="umbracoDefaultUILanguage" value="en-US" xdt:Locator="Match(key)" xdt:Transform="SetAttributes(value)" />
+    </appSettings>
 
-  <umbracoConfiguration xdt:Transform="InsertIfMissing">
-    <settings configSource="config\umbracoSettings.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
-    <BaseRestExtensions configSource="config\BaseRestExtensions.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
-    <FileSystemProviders configSource="config\FileSystemProviders.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
-    <dashBoard configSource="config\Dashboard.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
-    <HealthChecks configSource="config\HealthChecks.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
-  </umbracoConfiguration>
+    <umbracoConfiguration xdt:Transform="InsertIfMissing">
+        <settings configSource="config\umbracoSettings.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
+        <BaseRestExtensions configSource="config\BaseRestExtensions.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
+        <FileSystemProviders configSource="config\FileSystemProviders.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
+        <dashBoard configSource="config\Dashboard.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
+        <HealthChecks configSource="config\HealthChecks.config" xdt:Locator="Match(configSource)" xdt:Transform="InsertIfMissing" />
+    </umbracoConfiguration>
 
-  <FileSystemProviders xdt:Transform="Remove" />
-  <BaseRestExtensions xdt:Transform="Remove" />
+    <FileSystemProviders xdt:Transform="Remove" />
+    <BaseRestExtensions xdt:Transform="Remove" />
 
-  <system.data xdt:Transform="InsertIfMissing">
-    <DbProviderFactories xdt:Transform="InsertIfMissing">
-      <remove invariant="System.Data.SqlServerCe.4.0" xdt:Locator="Match(invariant)" xdt:Transform="InsertIfMissing" />
-      <add name="Microsoft SQL Server Compact Data Provider 4.0" invariant="System.Data.SqlServerCe.4.0" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe" xdt:Locator="Match(invariant)" xdt:Transform="SetAttributes(invariant,description,type)" />
-      <remove invariant="MySql.Data.MySqlClient" xdt:Locator="Match(invariant)" xdt:Transform="InsertIfMissing" />
-      <add invariant="MySql.Data.MySqlClient" xdt:Locator="Match(invariant)" xdt:Transform="Remove" />
-      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data" xdt:Locator="Match(invariant)" xdt:Transform="InsertIfMissing" />
-      <add invariant="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data" xdt:Locator="Match(invariant)" xdt:Transform="SetAttributes(type)" />
-    </DbProviderFactories>
-  </system.data>
-  <clientDependency xdt:Transform="RemoveAttributes(version)" />
+    <system.data xdt:Transform="InsertIfMissing">
+        <DbProviderFactories xdt:Transform="InsertIfMissing">
+            <remove invariant="System.Data.SqlServerCe.4.0" xdt:Locator="Match(invariant)" xdt:Transform="InsertIfMissing" />
+            <add name="Microsoft SQL Server Compact Data Provider 4.0" invariant="System.Data.SqlServerCe.4.0" description=".NET Framework Data Provider for Microsoft SQL Server Compact" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe" xdt:Locator="Match(invariant)" xdt:Transform="SetAttributes(invariant,description,type)" />
+            <remove invariant="MySql.Data.MySqlClient" xdt:Locator="Match(invariant)" xdt:Transform="InsertIfMissing" />
+            <add invariant="MySql.Data.MySqlClient" xdt:Locator="Match(invariant)" xdt:Transform="Remove" />
+            <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data" xdt:Locator="Match(invariant)" xdt:Transform="InsertIfMissing" />
+            <add invariant="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data" xdt:Locator="Match(invariant)" xdt:Transform="SetAttributes(type)" />
+        </DbProviderFactories>
+    </system.data>
 
-  <system.web xdt:Transform="InsertIfMissing" />
-  <system.web>
-    <siteMap xdt:Transform="Remove" />
-    <siteMap xdt:Transform="InsertIfMissing">
-      <providers xdt:Transform="InsertIfMissing">
-        <remove name="MySqlSiteMapProvider"  xdt:Transform="InsertIfMissing" />
-      </providers>
-    </siteMap>
-    <httpRuntime xdt:Transform="InsertIfMissing" />
-    <httpRuntime maxRequestLength="51200" fcnMode="Single" xdt:Transform="SetAttributes(fcnMode,maxRequestLength)" />
-    <httpRuntime targetFramework="4.5" xdt:Locator="Condition(count(@targetFramework) != 1)" xdt:Transform="SetAttributes(targetFramework)" />
+    <clientDependency xdt:Transform="RemoveAttributes(version)" />
 
-    <membership defaultProvider="DefaultMembershipProvider" xdt:Locator="Match(defaultProvider)" xdt:Transform="Remove" />
-    <roleManager defaultProvider="DefaultRoleProvider" xdt:Locator="Match(defaultProvider)" xdt:Transform="Remove"/>
-    <profile defaultProvider="DefaultProfileProvider" xdt:Locator="Match(defaultProvider)" xdt:Transform="Remove"/>>
-    <sessionState customProvider="DefaultSessionProvider" xdt:Locator="Match(customProvider)" xdt:Transform="Remove"/>
-    <compilation xdt:Transform="InsertIfMissing" />
-    <compilation>
-      <assemblies xdt:Transform="InsertIfMissing" />
-      <assemblies>
-        <add assembly="System.Net.Http, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Web.Http, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Xml.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Data.DataSetExtensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.Helpers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Web.WebPages, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <add assembly="System.Collections, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Collections.Concurrent, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ComponentModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ComponentModel.Annotations, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ComponentModel.EventBasedAsync, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Diagnostics.Contracts, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Diagnostics.Debug, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Diagnostics.Tools, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Diagnostics.Tracing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Dynamic.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Globalization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.IO, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Linq.Expressions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Linq.Parallel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Linq.Queryable, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Net.NetworkInformation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Net.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Net.Requests, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ObjectModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Reflection, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Reflection.Emit, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Reflection.Emit.ILGeneration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Reflection.Emit.Lightweight, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Reflection.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Reflection.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Resources.ResourceManager, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.InteropServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.InteropServices.WindowsRuntime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.Serialization.Json, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.Serialization.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Runtime.Serialization.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Security.Principal, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ServiceModel.Duplex, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ServiceModel.Http, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ServiceModel.NetTcp, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ServiceModel.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.ServiceModel.Security, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Text.Encoding, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Text.Encoding.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Text.RegularExpressions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Threading, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Threading.Tasks, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Threading.Tasks.Parallel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Xml.ReaderWriter, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Xml.XDocument, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-        <add assembly="System.Xml.XmlSerializer, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
-      </assemblies>
-    </compilation>
+    <system.web xdt:Transform="InsertIfMissing" />
+    <system.web>
+        <siteMap xdt:Transform="Remove" />
+        <siteMap xdt:Transform="InsertIfMissing">
+            <providers xdt:Transform="InsertIfMissing">
+                <remove name="MySqlSiteMapProvider"  xdt:Transform="InsertIfMissing" />
+            </providers>
+        </siteMap>
+        <httpRuntime xdt:Transform="InsertIfMissing" />
+        <httpRuntime maxRequestLength="51200" fcnMode="Single" xdt:Transform="SetAttributes(fcnMode,maxRequestLength)" />
+        <httpRuntime targetFramework="4.5" xdt:Locator="Condition(count(@targetFramework) != 1)" xdt:Transform="SetAttributes(targetFramework)" />
 
-    <compilation>
-      <assemblies>
-        <remove assembly="System.Web.Http" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Net.Http" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Collections" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Collections.Concurrent" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ComponentModel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ComponentModel.Annotations" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ComponentModel.EventBasedAsync" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Diagnostics.Contracts" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Diagnostics.Debug" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Diagnostics.Tools" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Diagnostics.Tracing" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Dynamic.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Globalization" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.IO" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Linq" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Linq.Expressions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Linq.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Linq.Queryable" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Net.NetworkInformation" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Net.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Net.Requests" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ObjectModel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Reflection" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Reflection.Emit" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Reflection.Emit.ILGeneration" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Reflection.Emit.Lightweight" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Reflection.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Reflection.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Resources.ResourceManager" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.InteropServices" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.InteropServices.WindowsRuntime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.Numerics" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.Serialization.Json" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.Serialization.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Runtime.Serialization.Xml" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Security.Principal" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ServiceModel.Duplex" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ServiceModel.Http" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ServiceModel.NetTcp" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ServiceModel.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.ServiceModel.Security" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Text.Encoding" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Text.Encoding.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Text.RegularExpressions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Threading" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Threading.Tasks" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Threading.Tasks.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Xml.ReaderWriter" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Xml.XDocument" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-        <remove assembly="System.Xml.XmlSerializer" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
-      </assemblies>
-    </compilation>
-    <compilation>
-      <assemblies>
-        <remove assembly="System.Web.Http" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Net.Http" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Collections" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Collections.Concurrent" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ComponentModel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ComponentModel.Annotations" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ComponentModel.EventBasedAsync" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Diagnostics.Contracts" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Diagnostics.Debug" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Diagnostics.Tools" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Diagnostics.Tracing" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Dynamic.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Globalization" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.IO" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Linq" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Linq.Expressions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Linq.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Linq.Queryable" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Net.NetworkInformation" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Net.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Net.Requests" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ObjectModel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Reflection" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Reflection.Emit" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Reflection.Emit.ILGeneration" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Reflection.Emit.Lightweight" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Reflection.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Reflection.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Resources.ResourceManager" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.InteropServices" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.InteropServices.WindowsRuntime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.Numerics" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.Serialization.Json" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.Serialization.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Runtime.Serialization.Xml" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Security.Principal" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ServiceModel.Duplex" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ServiceModel.Http" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ServiceModel.NetTcp" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ServiceModel.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.ServiceModel.Security" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Text.Encoding" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Text.Encoding.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Text.RegularExpressions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Threading" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Threading.Tasks" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Threading.Tasks.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Xml.ReaderWriter" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Xml.XDocument" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-        <remove assembly="System.Xml.XmlSerializer" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
-      </assemblies>
-    </compilation>
+        <membership defaultProvider="DefaultMembershipProvider" xdt:Locator="Match(defaultProvider)" xdt:Transform="Remove" />
+        <roleManager defaultProvider="DefaultRoleProvider" xdt:Locator="Match(defaultProvider)" xdt:Transform="Remove"/>
+        <profile defaultProvider="DefaultProfileProvider" xdt:Locator="Match(defaultProvider)" xdt:Transform="Remove"/>>
+        <sessionState customProvider="DefaultSessionProvider" xdt:Locator="Match(customProvider)" xdt:Transform="Remove"/>
+        <compilation xdt:Transform="InsertIfMissing" />
+        <compilation>
+            <assemblies xdt:Transform="InsertIfMissing" />
+            <assemblies>
+                <add assembly="System.Net.Http, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Web.Http, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Xml.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Data.DataSetExtensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.Helpers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Web.WebPages, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <add assembly="System.Collections, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Collections.Concurrent, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ComponentModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ComponentModel.Annotations, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ComponentModel.EventBasedAsync, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Diagnostics.Contracts, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Diagnostics.Debug, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Diagnostics.Tools, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Diagnostics.Tracing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Dynamic.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Globalization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.IO, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Linq.Expressions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Linq.Parallel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Linq.Queryable, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Net.NetworkInformation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Net.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Net.Requests, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ObjectModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Reflection, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Reflection.Emit, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Reflection.Emit.ILGeneration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Reflection.Emit.Lightweight, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Reflection.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Reflection.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Resources.ResourceManager, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.InteropServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.InteropServices.WindowsRuntime, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.Serialization.Json, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.Serialization.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Runtime.Serialization.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Security.Principal, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ServiceModel.Duplex, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ServiceModel.Http, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ServiceModel.NetTcp, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ServiceModel.Primitives, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.ServiceModel.Security, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Text.Encoding, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Text.Encoding.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Text.RegularExpressions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Threading, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Threading.Tasks, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Threading.Tasks.Parallel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Xml.ReaderWriter, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Xml.XDocument, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+                <add assembly="System.Xml.XmlSerializer, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" xdt:Locator="Match(assembly)" xdt:Transform="InsertIfMissing" />
+            </assemblies>
+        </compilation>
 
-    <xhtmlConformance xdt:Transform="Remove" />
+        <compilation>
+            <assemblies>
+                <remove assembly="System.Web.Http" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Net.Http" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Collections" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Collections.Concurrent" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ComponentModel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ComponentModel.Annotations" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ComponentModel.EventBasedAsync" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Diagnostics.Contracts" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Diagnostics.Debug" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Diagnostics.Tools" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Diagnostics.Tracing" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Dynamic.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Globalization" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.IO" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Linq" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Linq.Expressions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Linq.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Linq.Queryable" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Net.NetworkInformation" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Net.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Net.Requests" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ObjectModel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Reflection" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Reflection.Emit" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Reflection.Emit.ILGeneration" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Reflection.Emit.Lightweight" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Reflection.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Reflection.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Resources.ResourceManager" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.InteropServices" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.InteropServices.WindowsRuntime" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.Numerics" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.Serialization.Json" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.Serialization.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Runtime.Serialization.Xml" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Security.Principal" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ServiceModel.Duplex" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ServiceModel.Http" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ServiceModel.NetTcp" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ServiceModel.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.ServiceModel.Security" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Text.Encoding" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Text.Encoding.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Text.RegularExpressions" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Threading" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Threading.Tasks" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Threading.Tasks.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Xml.ReaderWriter" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Xml.XDocument" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+                <remove assembly="System.Xml.XmlSerializer" xdt:Locator="Match(assembly)" xdt:Transform="Remove" />
+            </assemblies>
+        </compilation>
+        <compilation>
+            <assemblies>
+                <remove assembly="System.Web.Http" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Net.Http" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Collections" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Collections.Concurrent" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ComponentModel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ComponentModel.Annotations" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ComponentModel.EventBasedAsync" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Diagnostics.Contracts" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Diagnostics.Debug" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Diagnostics.Tools" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Diagnostics.Tracing" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Dynamic.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Globalization" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.IO" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Linq" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Linq.Expressions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Linq.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Linq.Queryable" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Net.NetworkInformation" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Net.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Net.Requests" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ObjectModel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Reflection" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Reflection.Emit" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Reflection.Emit.ILGeneration" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Reflection.Emit.Lightweight" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Reflection.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Reflection.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Resources.ResourceManager" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.InteropServices" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.InteropServices.WindowsRuntime" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.Numerics" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.Serialization.Json" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.Serialization.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Runtime.Serialization.Xml" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Security.Principal" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ServiceModel.Duplex" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ServiceModel.Http" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ServiceModel.NetTcp" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ServiceModel.Primitives" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.ServiceModel.Security" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Text.Encoding" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Text.Encoding.Extensions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Text.RegularExpressions" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Threading" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Threading.Tasks" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Threading.Tasks.Parallel" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Xml.ReaderWriter" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Xml.XDocument" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+                <remove assembly="System.Xml.XmlSerializer" xdt:Locator="Match(assembly)" xdt:Transform="InsertBefore(/configuration/system.web/compilation/assemblies/add)" />
+            </assemblies>
+        </compilation>
 
-    <httpModules xdt:Transform="InsertIfMissing" />
-    <httpModules>
-      <add name="umbracoRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="umbracoBaseRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="viewstateMoverModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name=" UmbracoModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="UmbracoModule" type="Umbraco.Web.UmbracoModule,umbraco" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-    </httpModules>
+        <xhtmlConformance xdt:Transform="Remove" />
 
-    <httpHandlers xdt:Transform="InsertIfMissing" />
-    <httpHandlers>
-      <add path="GoogleSpellChecker.ashx" xdt:Locator="Match(path)" xdt:Transform="Remove"  />
-    </httpHandlers>
-  </system.web>
+        <httpModules xdt:Transform="InsertIfMissing" />
+        <httpModules>
+            <add name="umbracoRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="umbracoBaseRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="viewstateMoverModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name=" UmbracoModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="UmbracoModule" type="Umbraco.Web.UmbracoModule,umbraco" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+        </httpModules>
 
-  <system.webServer xdt:Transform="InsertIfMissing" />
-  <system.webServer>
-    <modules xdt:Transform="InsertIfMissing" />
-    <modules runAllManagedModulesForAllRequests="true" xdt:Transform="SetAttributes(runAllManagedModulesForAllRequests)">
-      <remove name="umbracoRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <remove name="viewstateMoverModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <remove name="umbracoBaseRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <remove name="WebDAVModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <!-- Inserts it as the first element. Also see http://stackoverflow.com/a/19041487/5018 -->
-      <remove name="WebDAVModule" xdt:Locator="Match(name)" xdt:Transform="Insert" />
+        <httpHandlers xdt:Transform="InsertIfMissing" />
+        <httpHandlers>
+            <add path="GoogleSpellChecker.ashx" xdt:Locator="Match(path)" xdt:Transform="Remove"  />
+        </httpHandlers>
+    </system.web>
 
-      <add name="umbracoRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="viewstateMoverModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="umbracoBaseRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <!-- Note, we're removing the one that starts with a space here, don't correct it -->
-      <!-- This to fix a quirk we for a lot of releases where we added it with the space by default -->
-      <add name=" UmbracoModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="UmbracoModule" type="Umbraco.Web.UmbracoModule,umbraco" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
-    </modules>
+    <system.webServer xdt:Transform="InsertIfMissing" />
+    <system.webServer>
+        <modules xdt:Transform="InsertIfMissing" />
+        <modules runAllManagedModulesForAllRequests="true" xdt:Transform="SetAttributes(runAllManagedModulesForAllRequests)">
+            <remove name="umbracoRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <remove name="viewstateMoverModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <remove name="umbracoBaseRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <remove name="WebDAVModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <!-- Inserts it as the first element. Also see http://stackoverflow.com/a/19041487/5018 -->
+            <remove name="WebDAVModule" xdt:Locator="Match(name)" xdt:Transform="Insert" />
 
-    <staticContent xdt:Transform="InsertIfMissing" />
-    <staticContent>
-      <remove fileExtension=".svg" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <mimeMap fileExtension=".svg" mimeType="image/svg+xml" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <remove fileExtension=".woff" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <mimeMap fileExtension=".woff" mimeType="application/x-font-woff" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <remove fileExtension=".woff2" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <mimeMap fileExtension=".woff2" mimeType="application/x-font-woff2" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <remove fileExtension=".less" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-      <mimeMap fileExtension=".less" mimeType="text/css" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
-    </staticContent>
+            <add name="umbracoRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="viewstateMoverModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="umbracoBaseRequestModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <!-- Note, we're removing the one that starts with a space here, don't correct it -->
+            <!-- This to fix a quirk we for a lot of releases where we added it with the space by default -->
+            <add name=" UmbracoModule" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="UmbracoModule" type="Umbraco.Web.UmbracoModule,umbraco" xdt:Locator="Match(name)" xdt:Transform="InsertIfMissing" />
+        </modules>
 
-    <handlers>
-      <remove name="SpellChecker" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-      <add name="SpellChecker" xdt:Locator="Match(name)" xdt:Transform="Remove" />
-    </handlers>
+        <staticContent xdt:Transform="InsertIfMissing" />
+        <staticContent>
+            <remove fileExtension=".svg" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <mimeMap fileExtension=".svg" mimeType="image/svg+xml" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <remove fileExtension=".woff" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <mimeMap fileExtension=".woff" mimeType="application/x-font-woff" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <remove fileExtension=".woff2" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <mimeMap fileExtension=".woff2" mimeType="application/x-font-woff2" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <remove fileExtension=".less" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+            <mimeMap fileExtension=".less" mimeType="text/css" xdt:Locator="Match(fileExtension)" xdt:Transform="InsertIfMissing" />
+        </staticContent>
 
-    <security xdt:Transform="InsertIfMissing">
-      <requestFiltering xdt:Transform="InsertIfMissing">
-        <requestLimits maxAllowedContentLength="52428800" xdt:Transform="InsertIfMissing" />
-      </requestFiltering>
-    </security>
+        <handlers>
+            <remove name="SpellChecker" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+            <add name="SpellChecker" xdt:Locator="Match(name)" xdt:Transform="Remove" />
+        </handlers>
 
-  </system.webServer>
+        <security xdt:Transform="InsertIfMissing">
+            <requestFiltering xdt:Transform="InsertIfMissing">
+                <requestLimits maxAllowedContentLength="52428800" xdt:Transform="InsertIfMissing" />
+            </requestFiltering>
+        </security>
 
-  <runtime xdt:Transform="InsertIfMissing" />
-  <runtime>
-    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1" xdt:Transform="InsertIfMissing" />
-  </runtime>
-
-  <runtime>
-    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='HtmlAgilityPack')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='AutoMapper')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Net.Http')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Newtonsoft.Json')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Web.Mvc')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Web.WebPages.Razor')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Web.Http')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin.Security.OAuth')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin.Security')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin.Security.Cookies')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Net.Http.Formatting')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.CodeAnalysis.CSharp')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='log4net')" xdt:Transform="Remove" />
-      <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Data.SqlServerCe')" xdt:Transform="Remove" />
-    </assemblyBinding>
-  </runtime>
-
-  <runtime>
-    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="HtmlAgilityPack" publicKeyToken="bd319b19eaf3b43a" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-1.4.9.5" newVersion="1.4.9.5" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="AutoMapper" publicKeyToken="be96cd2c38ef1005" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.3.1.0" newVersion="3.3.1.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="System.Net.Http" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
-        <bindingRedirect oldVersion="0.0.0.0-4.0.0.0" newVersion="4.0.0.0"/>
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-10.0.0.0" newVersion="10.0.0.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-5.2.3.0" newVersion="5.2.3.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="System.Web.WebPages.Razor" publicKeyToken="31bf3856ad364e35" />
-        <bindingRedirect oldVersion="0.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="System.Web.Http" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-5.2.3.0" newVersion="5.2.3.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="Microsoft.Owin" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="Microsoft.Owin.Security.OAuth" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="Microsoft.Owin.Security" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="Microsoft.Owin.Security.Cookies" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="System.Net.Http.Formatting" publicKeyToken="31bf3856ad364e35" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-5.2.3.0" newVersion="5.2.3.0" />
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral"/>
-        <bindingRedirect oldVersion="0.0.0.0-2.0.8.0" newVersion="2.0.8.0"/>
-      </dependentAssembly>
-      <dependentAssembly xdt:Transform="Insert">
-        <assemblyIdentity name="System.Data.SqlServerCe" publicKeyToken="89845DCD8080CC91" culture="neutral"/>
-        <bindingRedirect oldVersion="0.0.0.0-4.0.0.1" newVersion="4.0.0.1"/>
-      </dependentAssembly>
-    </assemblyBinding>
-  </runtime>
-
-  <system.web.webPages.razor xdt:Transform="Remove" />
-
-  <location path="umbraco" xdt:Locator="Match(path)" xdt:Transform="InsertIfMissing" />
-  <location path="umbraco" xdt:Locator="Match(path)">
-    <system.webServer xdt:Transform="InsertIfMissing">
-      <urlCompression doStaticCompression="false" doDynamicCompression="false" dynamicCompressionBeforeCache="false" xdt:Transform="SetAttributes(doStaticCompression,doDynamicCompression,dynamicCompressionBeforeCache)" />
     </system.webServer>
-  </location>
 
-  <location path="App_Plugins" xdt:Locator="Match(path)" xdt:Transform="InsertIfMissing" />
-  <location path="App_Plugins" xdt:Locator="Match(path)">
-    <system.webServer xdt:Transform="InsertIfMissing">
-      <urlCompression doStaticCompression="false" doDynamicCompression="false" dynamicCompressionBeforeCache="false" xdt:Transform="SetAttributes(doStaticCompression,doDynamicCompression,dynamicCompressionBeforeCache)" />
-    </system.webServer>
-  </location>
+    <runtime xdt:Transform="InsertIfMissing" />
+    <runtime>
+        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1" xdt:Transform="InsertIfMissing" />
+    </runtime>
 
-</configuration>
+    <runtime>
+        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='HtmlAgilityPack')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='AutoMapper')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Net.Http')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Newtonsoft.Json')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Web.Mvc')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Web.WebPages.Razor')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Web.Http')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin.Security.OAuth')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin.Security')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.Owin.Security.Cookies')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Net.Http.Formatting')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='Microsoft.CodeAnalysis.CSharp')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='log4net')" xdt:Transform="Remove" />
+            <dependentAssembly xdt:Locator="Condition(./_defaultNamespace:assemblyIdentity/@name='System.Data.SqlServerCe')" xdt:Transform="Remove" />
+        </assemblyBinding>
+    </runtime>
+
+    <runtime>
+        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="HtmlAgilityPack" publicKeyToken="bd319b19eaf3b43a" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-1.4.9.5" newVersion="1.4.9.5" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="AutoMapper" publicKeyToken="be96cd2c38ef1005" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-3.3.1.0" newVersion="3.3.1.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="System.Net.Http" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/>
+                <bindingRedirect oldVersion="0.0.0.0-4.0.0.0" newVersion="4.0.0.0"/>
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-10.0.0.0" newVersion="10.0.0.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-5.2.3.0" newVersion="5.2.3.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="System.Web.WebPages.Razor" publicKeyToken="31bf3856ad364e35" />
+                <bindingRedirect oldVersion="0.0.0.0-3.0.0.0" newVersion="3.0.0.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="System.Web.Http" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-5.2.3.0" newVersion="5.2.3.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="Microsoft.Owin" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="Microsoft.Owin.Security.OAuth" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="Microsoft.Owin.Security" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="Microsoft.Owin.Security.Cookies" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-3.1.0.0" newVersion="3.1.0.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="System.Net.Http.Formatting" publicKeyToken="31bf3856ad364e35" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-5.2.3.0" newVersion="5.2.3.0" />
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral"/>
+                <bindingRedirect oldVersion="0.0.0.0-2.0.8.0" newVersion="2.0.8.0"/>
+            </dependentAssembly>
+            <dependentAssembly xdt:Transform="Insert">
+                <assemblyIdentity name="System.Data.SqlServerCe" publicKeyToken="89845DCD8080CC91" culture="neutral"/>
+                <bindingRedirect oldVersion="0.0.0.0-4.0.0.1" newVersion="4.0.0.1"/>
+            </dependentAssembly>
+        </assemblyBinding>
+    </runtime>
+
+    <system.web.webPages.razor xdt:Transform="Remove" />
+
+    <location path="umbraco" xdt:Locator="Match(path)" xdt:Transform="InsertIfMissing" />
+    <location path="umbraco" xdt:Locator="Match(path)">
+        <system.webServer xdt:Transform="InsertIfMissing">
+            <urlCompression doStaticCompression="false" doDynamicCompression="false" dynamicCompressionBeforeCache="false" xdt:Transform="SetAttributes(doStaticCompression,doDynamicCompression,dynamicCompressionBeforeCache)" />
+        </system.webServer>
+    </location>
+
+    <location path="App_Plugins" xdt:Locator="Match(path)" xdt:Transform="InsertIfMissing" />
+    <location path="App_Plugins" xdt:Locator="Match(path)">
+        <system.webServer xdt:Transform="InsertIfMissing">
+            <urlCompression doStaticCompression="false" doDynamicCompression="false" dynamicCompressionBeforeCache="false" xdt:Transform="SetAttributes(doStaticCompression,doDynamicCompression,dynamicCompressionBeforeCache)" />
+        </system.webServer>
+    </location>
+
+</configuration>

build/NuSpecs/tools/trees.config.install.xdt

@@ -46,7 +46,7 @@
   <add application="settings" alias="scripts" title="Scripts" type="Umbraco.Web.Trees.ScriptTreeController, umbraco" iconClosed="icon-folder" iconOpen="icon-folder" sortOrder="4" 
        xdt:Locator="Match(application,alias)" 
        xdt:Transform="SetAttributes()" />
-  <add application="settings" alias="dictionary" title="Dictionary" type="umbraco.loadDictionary, umbraco" iconClosed="icon-folder" iconOpen="icon-folder" sortOrder="6" 
+  <add application="settings" alias="dictionary" title="Dictionary" type="Umbraco.Web.Trees.DictionaryTreeController, umbraco" iconClosed="icon-folder" iconOpen="icon-folder" sortOrder="6" 
        xdt:Locator="Match(application,alias)" 
        xdt:Transform="SetAttributes()" />
   <add alias="dictionary" application="settings"

build/NuSpecs/tools/umbracoSettings.config.install.xdt

@@ -5,4 +5,6 @@
   </content>
   
   <webservices xdt:Transform="Remove" />
+  
+  <repositories xdt:Transform="Remove" />
 </settings>

build/RevertToCleanInstall.bat

@@ -1,127 +0,0 @@
-@ECHO OFF
-
-:choice
-set /P c=WARNING! Are you sure you want to continue, this will remove all package files, view files, sqlce database, etc... Press 'Y' to auto-remove all files/folders, 'N' to cancel or 'C' to prompt for each folder removal?
-if /I "%c%" EQU "C" goto :prompt
-if /I "%c%" EQU "Y" goto :auto
-if /I "%c%" EQU "N" goto :exit
-goto :choice
-
-
-:prompt
-
-echo Current folder: %CD%
-
-echo Removing sqlce database
-del ..\src\Umbraco.Web.UI\App_Data\Umbraco.sdf
-
-echo Resetting installedPackages.config
-echo ^<?xml version="1.0" encoding="utf-8"?^>^<packages^>^</packages^> >..\src\Umbraco.Web.UI\App_Data\packages\installed\installedPackages.config
-
-echo Removing plugin cache files
-del ..\src\Umbraco.Web.UI\App_Data\TEMP\PluginCache\*.*
-
-echo Removing cache files and examine index
-del ..\src\Umbraco.Web.UI\App_Data\TEMP\*.*
-
-echo Removing log files
-del ..\src\Umbraco.Web.UI\App_Data\Logs\*.*
-
-echo Removing packages
-del ..\src\Umbraco.Web.UI\App_Data\packages\*.*
-
-echo Removing previews
-del ..\src\Umbraco.Web.UI\App_Data\preview\*.*
-
-echo Removing app code files (typically added by starterkits)
-del ..\src\Umbraco.Web.UI\App_Code\*.*
-
-echo Removing xslt files
-del ..\src\Umbraco.Web.UI\xslt\*.*
-
-echo Removing user control files
-del ..\src\Umbraco.Web.UI\UserControls\*.*
-
-echo Removing masterpage files
-del ..\src\Umbraco.Web.UI\masterpages\*.*
-
-echo Removing razor files
-del ..\src\Umbraco.Web.UI\macroScripts\*.*
-
-echo Removing media files
-del ..\src\Umbraco.Web.UI\media\*.*
-
-echo Removing script files
-del ..\src\Umbraco.Web.UI\scripts\*.*
-
-echo Removing css files
-del ..\src\Umbraco.Web.UI\css\*.*
-
-echo "Umbraco install reverted to clean install"
-pause 
-exit
-
-
-
-:auto
-
-echo Current folder: %CD%
-
-echo Removing sqlce database
-del ..\src\Umbraco.Web.UI\App_Data\Umbraco.sdf
-
-echo Resetting installedPackages.config
-echo ^<?xml version="1.0" encoding="utf-8"?^>^<packages^>^</packages^> >..\src\Umbraco.Web.UI\App_Data\packages\installed\installedPackages.config
-
-echo Removing plugin cache files
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\TEMP\PluginCache\*.*) DO DEL %%A
-
-echo Removing cache files and examine index
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\TEMP\*.*) DO DEL %%A
-
-echo Removing log files
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\Logs\*.*) DO DEL %%A
-
-echo Removing packages
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\packages\*.*) DO DEL %%A
-
-echo Removing previews
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\preview\*.*) DO DEL %%A
-
-echo Removing app code files (typically added by starterkits)
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Code\*.*) DO DEL %%A
-
-echo Removing xslt files
-FOR %%A IN (..\src\Umbraco.Web.UI\xslt\*.*) DO DEL %%A
-
-echo Removing masterpage files
-FOR %%A IN (..\src\Umbraco.Web.UI\masterpages\*.*) DO DEL %%A
-
-echo Removing user control files
-FOR %%A IN (..\src\Umbraco.Web.UI\usercontrols\*.*) DO DEL %%A
-
-echo Removing view files
-ATTRIB +H ..\src\Umbraco.Web.UI\Views\Partials\Grid\*.cshtml /S
-FOR %%A IN (..\src\Umbraco.Web.UI\Views\) DO DEL /Q /S *.cshtml -H
-ATTRIB -H ..\src\Umbraco.Web.UI\Views\Partials\Grid\*.cshtml /S
-
-echo Removing razor files
-FOR %%A IN (..\src\Umbraco.Web.UI\macroScripts\*.*) DO DEL %%A
-
-echo Removing media files
-FOR %%A IN (..\src\Umbraco.Web.UI\media\*.*) DO DEL %%A
-
-echo Removing script files
-FOR %%A IN (..\src\Umbraco.Web.UI\scripts\*.*) DO DEL %%A
-
-echo Removing css files
-FOR %%A IN (..\src\Umbraco.Web.UI\css\*.*) DO DEL %%A
-
-echo "Umbraco install reverted to clean install"
-pause 
-exit
-
-
-
-:exit
-exit

build/RevertToEmptyInstall.bat

@@ -1,163 +0,0 @@
-@ECHO OFF
-
-:choice
-set /P c=WARNING! Are you sure you want to continue, this will remove all package files, view files, sqlce database, etc... Press 'Y' to auto-remove all files/folders, 'N' to cancel or 'C' to prompt for each folder removal?
-if /I "%c%" EQU "C" goto :prompt
-if /I "%c%" EQU "Y" goto :auto
-if /I "%c%" EQU "N" goto :exit
-goto :choice
-
-
-:prompt
-
-echo Current folder: %CD%
-
-echo Regenerating SQL CE database
-SET buildfolder=%CD%
-CD ..\tools\RegenerateUmbracoSQLCEDatabase\
-RegenerateUmbracoSQLCEDatabase.exe %CD%\..\..\src\Umbraco.Web.UI
-CD %buildfolder%
-
-echo Removing bin files
-del ..\src\Umbraco.Web.UI\bin\*.*
-
-echo Building solution
-%windir%\Microsoft.NET\Framework\v4.0.30319\msbuild.exe ..\src\umbraco.sln /t:Clean,Build
-
-echo Resetting installedPackages.config
-echo ^<?xml version="1.0" encoding="utf-8"?^>^<packages^>^</packages^> >..\src\Umbraco.Web.UI\App_Data\packages\installed\installedPackages.config
-
-echo Removing plugin cache files
-del ..\src\Umbraco.Web.UI\App_Data\TEMP\PluginCache\*.*
-
-echo Removing cache files and examine index
-del ..\src\Umbraco.Web.UI\App_Data\TEMP\*.*
-
-echo Removing log files
-del ..\src\Umbraco.Web.UI\App_Data\Logs\*.*
-
-echo Removing packages
-del ..\src\Umbraco.Web.UI\App_Data\packages\*.*
-
-echo Removing previews
-del ..\src\Umbraco.Web.UI\App_Data\preview\*.*
-
-echo Removing app code files (typically added by starterkits)
-del ..\src\Umbraco.Web.UI\App_Code\*.*
-
-echo Removing xslt files
-del ..\src\Umbraco.Web.UI\xslt\*.*
-
-echo Removing user control files
-del ..\src\Umbraco.Web.UI\UserControls\*.*
-
-echo Removing masterpage files
-del ..\src\Umbraco.Web.UI\masterpages\*.*
-
-echo Removing razor files
-del ..\src\Umbraco.Web.UI\macroScripts\*.*
-
-echo Removing media files
-del ..\src\Umbraco.Web.UI\media\*.*
-
-echo Removing script files
-del ..\src\Umbraco.Web.UI\scripts\*.*
-
-echo Removing css files
-del ..\src\Umbraco.Web.UI\css\*.*
-
-echo "Umbraco install reverted to clean install"
-pause 
-exit
-
-
-
-:auto
-
-echo Current folder: %CD%
-
-echo Regenerating SQL CE database
-SET buildfolder=%CD%
-CD ..\tools\RegenerateUmbracoSQLCEDatabase\
-RegenerateUmbracoSQLCEDatabase.exe %CD%\..\..\src\Umbraco.Web.UI
-CD %buildfolder%
-
-echo Removing bin files
- FOR %%A IN (..\src\Umbraco.Web.UI\bin\*.*) DO DEL %%A
-
-echo Building solution
-%windir%\Microsoft.NET\Framework\v4.0.30319\msbuild.exe ..\src\umbraco.sln /t:Clean,Build
-
-echo Resetting installedPackages.config
-echo ^<?xml version="1.0" encoding="utf-8"?^>^<packages^>^</packages^> >..\src\Umbraco.Web.UI\App_Data\packages\installed\installedPackages.config
-
-echo Removing plugin cache files
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\TEMP\PluginCache\*.*) DO DEL %%A
-
-echo Removing cache files and examine index
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\TEMP\*.*) DO DEL %%A
-
-echo Removing log files
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\Logs\*.*) DO DEL %%A
-
-echo Removing packages
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\packages\*.*) DO DEL %%A
-
-echo Removing previews
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Data\preview\*.*) DO DEL %%A
-
-echo Removing app code files (typically added by starterkits)
-FOR %%A IN (..\src\Umbraco.Web.UI\App_Code\*.*) DO DEL %%A
-
-echo Removing xslt files
-FOR %%A IN (..\src\Umbraco.Web.UI\xslt\*.*) DO DEL %%A
-
-echo Removing masterpage files
-FOR %%A IN (..\src\Umbraco.Web.UI\masterpages\*.*) DO DEL %%A
-
-echo Removing user control files
-FOR %%A IN (..\src\Umbraco.Web.UI\usercontrols\*.*) DO DEL %%A
-
-echo Removing view files
-ATTRIB +H ..\src\Umbraco.Web.UI\Views\Partials\Grid\*.cshtml /S
-FOR %%A IN (..\src\Umbraco.Web.UI\Views\) DO DEL /Q /S *.cshtml -H
-ATTRIB -H ..\src\Umbraco.Web.UI\Views\Partials\Grid\*.cshtml /S
-
-echo Removing razor files
-FOR %%A IN (..\src\Umbraco.Web.UI\macroScripts\*.*) DO DEL %%A
-
-echo Removing media files
-FOR %%A IN (..\src\Umbraco.Web.UI\media\*.*) DO DEL %%A
-
-echo Removing script files
-FOR %%A IN (..\src\Umbraco.Web.UI\scripts\*.*) DO DEL %%A
-
-echo Removing css files
-FOR %%A IN (..\src\Umbraco.Web.UI\css\*.*) DO DEL %%A
-
-echo Removing Courier files
-del ..\src\Umbraco.Web.UI\config\courier.config
-del ..\src\Umbraco.Web.UI\umbraco\images\tray\courier.jpg
-rmdir "..\src\Umbraco.Web.UI\umbraco\plugins\courier\" /S /Q
-
-echo Removing Contour files
-del ..\src\Umbraco.Web.UI\umbraco\images\tray\contour.png
-FOR %%A IN (..\src\Umbraco.Web.UI\umbraco\images\umbraco\icon_*.*) DO DEL %%A
-rmdir "..\src\Umbraco.Web.UI\umbraco\plugins\umbracoContour\" /S /Q
-del ..\src\Umbraco.Web.UI\umbraco\xslt\templates\UmbracoContour*.* /S /Q
-rmdir "..\src\Umbraco.Web.UI\usercontrols\umbracoContour\" /S /Q
-
-echo Start with a clean web.config
-copy ..\src\Umbraco.Web.UI\web.Template.config ..\src\Umbraco.Web.UI\web.config /Y
-
-echo Start with a clean web.config
-copy ..\src\Umbraco.Web.UI\web.Template.config ..\src\Umbraco.Web.UI\web.config /Y
-
-echo "Umbraco install reverted to clean install"
-pause 
-exit
-
-
-
-:exit
-exit

build/azuregalleryrelease.ps1

@@ -3,57 +3,57 @@
  [string]$Directory
 )
 $workingDirectory = $Directory
-CD $workingDirectory
+CD "$($workingDirectory)"
 
 # Clone repo
-$fullGitUrl = "https://$env:GIT_URL/$env:GIT_REPOSITORYNAME.git"
-git clone $fullGitUrl 2>&1 | % { $_.ToString() } 
+$fullGitUrl = "https://$($env:GIT_URL)/$($env:GIT_REPOSITORYNAME).git"
+git clone $($fullGitUrl) $($env:GIT_REPOSITORYNAME) 2>&1 | % { $_.ToString() } 
 
 # Remove everything so that unzipping the release later will update everything
 # Don't remove the readme file nor the git directory
 Write-Host "Cleaning up git directory before adding new version"
-Remove-Item -Recurse $workingDirectory\$env:GIT_REPOSITORYNAME\* -Exclude README.md,.git
+Remove-Item -Recurse "$($workingDirectory)\$($env:GIT_REPOSITORYNAME)\*" -Exclude README.md,.git
 
 # Find release zip
-$zipsDir = "$workingDirectory\$env:BUILD_DEFINITIONNAME\zips"
+$zipsDir = "$($workingDirectory)\$($env:BUILD_DEFINITIONNAME)\zips"
 $pattern = "UmbracoCms.([0-9]{1,2}.[0-9]{1,3}.[0-9]{1,3}).zip"
-Write-Host "Searching for Umbraco release files in $workingDirectory\$zipsDir for a file with pattern $pattern"
-$file = (Get-ChildItem $zipsDir | Where-Object { $_.Name -match "$pattern" })
+Write-Host "Searching for Umbraco release files in $($zipsDir) for a file with pattern $($pattern)"
+$file = (Get-ChildItem "$($zipsDir)" | Where-Object { $_.Name -match "$($pattern)" })
 
 if($file)
 {
     # Get release name
-    $version = [regex]::Match($file.Name, $pattern).captures.groups[1].value
-    $releaseName = "Umbraco $version"
-    Write-Host "Found $releaseName"
+    $version = [regex]::Match($($file.Name), $($pattern)).captures.groups[1].value
+    $releaseName = "Umbraco $($version)"
+    Write-Host "Found $($releaseName)"
     
     # Unzip into repository to update release
     Add-Type -AssemblyName System.IO.Compression.FileSystem
-    Write-Host "Unzipping $($file.FullName) to $workingDirectory\$env:GIT_REPOSITORYNAME"
-    [System.IO.Compression.ZipFile]::ExtractToDirectory("$($file.FullName)", "$workingDirectory\$env:GIT_REPOSITORYNAME")
+    Write-Host "Unzipping $($file.FullName) to $($workingDirectory)\$($env:GIT_REPOSITORYNAME)"
+    [System.IO.Compression.ZipFile]::ExtractToDirectory("$($file.FullName)", "$($workingDirectory)\$($env:GIT_REPOSITORYNAME)")
     
     # Telling git who we are
     git config --global user.email "coffee@umbraco.com" 2>&1 | % { $_.ToString() }
     git config --global user.name "Umbraco HQ" 2>&1 | % { $_.ToString() }
     
     # Commit
-    CD $env:GIT_REPOSITORYNAME
-    Write-Host "Committing Umbraco $version Release from Build Output"
+    CD "$($workingDirectory)\$($env:GIT_REPOSITORYNAME)"
+    Write-Host "Committing Umbraco $($version) Release from Build Output"
 
     git add . 2>&1 | % { $_.ToString() } 
-    git commit -m " Release $releaseName from Build Output" 2>&1 | % { $_.ToString() } 
+    git commit -m " Release $($releaseName) from Build Output" 2>&1 | % { $_.ToString() } 
 
     # Tag the release
-    git tag -a "v$version" -m "v$version"
+    git tag -a "v$($version)" -m "v$($version)"
 
     # Push release to master
-    $fullGitAuthUrl = "https://$($env:GIT_USERNAME):$GitHubPersonalAccessToken@$env:GIT_URL/$env:GIT_REPOSITORYNAME.git"
-    git push $fullGitAuthUrl 2>&1 | % { $_.ToString() } 
+    $fullGitAuthUrl = "https://$($env:GIT_USERNAME):$($GitHubPersonalAccessToken)@$($env:GIT_URL)/$($env:GIT_REPOSITORYNAME).git"
+    git push $($fullGitAuthUrl) 2>&1 | % { $_.ToString() } 
 
     #Push tag to master
-    git push $fullGitAuthUrl --tags 2>&1 | % { $_.ToString() }
+    git push $($fullGitAuthUrl) --tags 2>&1 | % { $_.ToString() }
 }
 else
 {
-    Write-Error "Umbraco release file not found, searched in $workingDirectory\$zipsDir for a file with pattern $pattern - cancelling"
+    Write-Error "Umbraco release file not found, searched in $($workingDirectory)\$($zipsDir) for a file with pattern $($pattern) - canceling"
 }

src/SolutionInfo.cs

@@ -2,7 +2,7 @@
 using System.Resources;
 
 [assembly: AssemblyCompany("Umbraco")]
-[assembly: AssemblyCopyright("Copyright © Umbraco 2017")]
+[assembly: AssemblyCopyright("Copyright © Umbraco 2018")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 
@@ -11,5 +11,5 @@ using System.Resources;
 
 [assembly: AssemblyVersion("1.0.*")]
 
-[assembly: AssemblyFileVersion("7.9.2")]
-[assembly: AssemblyInformationalVersion("7.9.2")]
+[assembly: AssemblyFileVersion("7.14.0")]
+[assembly: AssemblyInformationalVersion("7.14.0")]

src/Umbraco.Core/ApplicationContext.cs

@@ -1,8 +1,8 @@
-using System;
-using System.Collections.Generic;
+using Semver;
+using System;
+using System.Collections.Concurrent;
 using System.Configuration;
 using System.Threading;
-using Semver;
 using Umbraco.Core.Configuration;
 using Umbraco.Core.Logging;
 using Umbraco.Core.ObjectResolution;
@@ -13,7 +13,7 @@ using Umbraco.Core.Sync;
 
 namespace Umbraco.Core
 {
-	/// <summary>
+    /// <summary>
     /// the Umbraco Application context
     /// </summary>
     /// <remarks>
@@ -270,7 +270,7 @@ namespace Umbraco.Core
                 return _umbracoApplicationUrl;
             }
         }
-
+
         /// <summary>
         /// Resets the url.
         /// </summary>
@@ -280,10 +280,10 @@ namespace Umbraco.Core
         }
 
 	    // ReSharper disable once InconsistentNaming
-	    internal string _umbracoApplicationUrl;
-
-        internal List<string> _umbracoApplicationDomains = new List<string>();
-
+	    internal string _umbracoApplicationUrl;
+
+        internal ConcurrentDictionary<string, string> _umbracoApplicationDomains = new ConcurrentDictionary<string, string>();
+
         internal string _umbracoApplicationDeploymentId;
 
         private Lazy<bool> _configured;
@@ -399,7 +399,7 @@ namespace Umbraco.Core
             }
 
             return version;
-        }
+        }
 
         private void AssertIsNotReady()
         {

src/Umbraco.Core/Configuration/GlobalSettings.cs

@@ -32,10 +32,9 @@ namespace Umbraco.Core.Configuration
 
         #region Private static fields
 
-        private static Version _version;
         private static readonly object Locker = new object();
         //make this volatile so that we can ensure thread safety with a double check lock
-    	private static volatile string _reservedUrlsCache;
+        private static volatile string _reservedUrlsCache;
         private static string _reservedPathsCache;
         private static HashSet<string> _reservedList = new HashSet<string>();
         private static string _reservedPaths;
@@ -71,7 +70,8 @@ namespace Umbraco.Core.Configuration
 
             var config = WebConfigurationManager.OpenWebConfiguration(appPath);
             var settings = (MailSettingsSectionGroup)config.GetSectionGroup("system.net/mailSettings");
-            if (settings == null || settings.Smtp == null) return false;
+            // note: "noreply@example.com" is/was the sample SMTP from email - we'll regard that as "not configured"
+            if (settings == null || settings.Smtp == null || "noreply@example.com".Equals(settings.Smtp.From, StringComparison.OrdinalIgnoreCase)) return false;
             if (settings.Smtp.SpecifiedPickupDirectory != null && string.IsNullOrEmpty(settings.Smtp.SpecifiedPickupDirectory.PickupDirectoryLocation) == false)
                 return true;
             if (settings.Smtp.Network != null && string.IsNullOrEmpty(settings.Smtp.Network.Host) == false)
@@ -190,7 +190,7 @@ namespace Umbraco.Core.Configuration
         /// This will return the MVC area that we will route all custom routes through like surface controllers, etc...
         /// We will use the 'Path' (default ~/umbraco) to create it but since it cannot contain '/' and people may specify a path of ~/asdf/asdf/admin
         /// we will convert the '/' to '-' and use that as the path. its a bit lame but will work.
-		/// 
+        /// 
         /// We also make sure that the virtual directory (SystemDirectories.Root) is stripped off first, otherwise we'd end up with something
         /// like "MyVirtualDirectory-Umbraco" instead of just "Umbraco".
         /// </remarks>
@@ -205,7 +205,7 @@ namespace Umbraco.Core.Configuration
                 var path = Path;
                 if (path.StartsWith(SystemDirectories.Root)) // beware of TrimStart, see U4-2518
                     path = path.Substring(SystemDirectories.Root.Length);
-			    return path.TrimStart('~').TrimStart('/').Replace('/', '-').Trim().ToLower();
+                return path.TrimStart('~').TrimStart('/').Replace('/', '-').Trim().ToLower();
             }
         }
 
@@ -312,7 +312,7 @@ namespace Umbraco.Core.Configuration
                 SetMembershipProvidersLegacyEncoding(UmbracoConfig.For.UmbracoSettings().Providers.DefaultBackOfficeUserProvider, value);
             }
         }
-		
+        
         /// <summary>
         /// Saves a setting into the configuration file.
         /// </summary>
@@ -503,7 +503,7 @@ namespace Umbraco.Core.Configuration
         }
 
         /// <summary>
-        /// Returns a string value to determine if umbraco should skip version-checking.
+        /// Returns the number of days that should take place between version checks.
         /// </summary>
         /// <value>The version check period in days (0 = never).</value>
         public static int VersionCheckPeriod

src/Umbraco.Core/Configuration/UmbracoSettings/ContentElement.cs

@@ -112,7 +112,7 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
         {
             get
             {
-                return GetOptionalTextElement("PreviewBadge", @"<a id=""umbracoPreviewBadge"" style=""position: absolute; top: 0; right: 0; border: 0; width: 149px; height: 149px; background: url('{1}/preview/previewModeBadge.png') no-repeat;"" href=""{0}/endPreview.aspx?redir={2}""><span style=""display:none;"">In Preview Mode - click to end</span></a>");                
+                return GetOptionalTextElement("PreviewBadge", @"<a id=""umbracoPreviewBadge"" style=""z-index:99999; position: absolute; top: 0; right: 0; border: 0; width: 149px; height: 149px; background: url('{1}/preview/previewModeBadge.png') no-repeat;"" href=""{0}/endPreview.aspx?redir={2}""><span style=""display:none;"">In Preview Mode - click to end</span></a>");                
             }
         }
 
@@ -360,4 +360,4 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
         }
         
     }
-}
+}

src/Umbraco.Core/Configuration/UmbracoSettings/HelpElement.cs

@@ -9,7 +9,7 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
     [Obsolete("This is no longer used and will be removed in future versions")]
     internal class HelpElement : ConfigurationElement, IHelpSection
     {
-        [ConfigurationProperty("defaultUrl", DefaultValue = "http://our.umbraco.org/wiki/umbraco-help/{0}/{1}")]
+        [ConfigurationProperty("defaultUrl", DefaultValue = "https://our.umbraco.com/wiki/umbraco-help/{0}/{1}")]
         public string DefaultUrl
         {
             get { return (string) base["defaultUrl"]; }

src/Umbraco.Core/Configuration/UmbracoSettings/IContentSection.cs

@@ -13,7 +13,7 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
         IEnumerable<string> ImageTagAllowedAttributes { get; }
 
         IEnumerable<IImagingAutoFillUploadField> ImageAutoFillProperties { get; }
-
+        
         string ScriptFolderPath { get; }
 
         IEnumerable<string> ScriptFileTypes { get; }

src/Umbraco.Core/Configuration/UmbracoSettings/IRepositoriesSection.cs

@@ -1,10 +0,0 @@
-using System.Collections.Generic;
-
-namespace Umbraco.Core.Configuration.UmbracoSettings
-{
-
-    public interface IRepositoriesSection : IUmbracoConfigurationSection
-    {
-        IEnumerable<IRepository> Repositories { get; }
-    }
-}

src/Umbraco.Core/Configuration/UmbracoSettings/IRepository.cs

@@ -1,14 +0,0 @@
-using System;
-
-namespace Umbraco.Core.Configuration.UmbracoSettings
-{
-    public interface IRepository
-    {
-        string Name { get; }
-        Guid Id { get;  }
-        string RepositoryUrl { get; }
-        string WebServiceUrl { get; }
-        bool HasCustomWebServiceUrl { get; }
-        string RestApiUrl { get; }
-    }
-}

src/Umbraco.Core/Configuration/UmbracoSettings/IUmbracoSettingsSection.cs

@@ -24,9 +24,7 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
         IScheduledTasksSection ScheduledTasks { get; }
 
         IDistributedCallSection DistributedCall { get; }
-
-        IRepositoriesSection PackageRepositories { get; }
-
+        
         IProvidersSection Providers { get; }
 
         [EditorBrowsable(EditorBrowsableState.Never)]
@@ -37,4 +35,4 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
 
         IScriptingSection Scripting { get; }
     }
-}
+}

src/Umbraco.Core/Configuration/UmbracoSettings/IWebRoutingSection.cs

@@ -8,6 +8,8 @@
 
         bool DisableAlternativeTemplates { get; }
 
+        bool ValidateAlternativeTemplates { get; }
+        
         bool DisableFindContentByIdPath { get; }
 		
         bool DisableRedirectUrlTracking { get; }

src/Umbraco.Core/Configuration/UmbracoSettings/RepositoriesCollection.cs

@@ -1,36 +0,0 @@
-using System.Collections.Generic;
-using System.Configuration;
-
-namespace Umbraco.Core.Configuration.UmbracoSettings
-{
-    internal class RepositoriesCollection : ConfigurationElementCollection, IEnumerable<IRepository>
-    {
-        internal void Add(RepositoryElement item)
-        {
-            BaseAdd(item);
-        }
-
-        protected override ConfigurationElement CreateNewElement()
-        {
-            return new RepositoryElement();
-        }
-
-        protected override object GetElementKey(ConfigurationElement element)
-        {
-            return ((RepositoryElement)element).Id;
-        }
-
-        IEnumerator<IRepository> IEnumerable<IRepository>.GetEnumerator()
-        {
-            for (var i = 0; i < Count; i++)
-            {
-                yield return BaseGet(i) as IRepository;
-            }
-        }
-
-        System.Collections.IEnumerator System.Collections.IEnumerable.GetEnumerator()
-        {
-            return GetEnumerator();
-        }
-    }
-}

src/Umbraco.Core/Configuration/UmbracoSettings/RepositoriesElement.cs

@@ -1,23 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Configuration;
-
-namespace Umbraco.Core.Configuration.UmbracoSettings
-{
-    internal class RepositoriesElement : ConfigurationElement, IRepositoriesSection
-    {
-
-        [ConfigurationCollection(typeof(RepositoriesCollection), AddItemName = "repository")]
-        [ConfigurationProperty("", IsDefaultCollection = true)]
-        internal RepositoriesCollection Repositories
-        {
-            get { return (RepositoriesCollection) base[""]; }
-            set { base[""] = value; }
-        }
-
-        IEnumerable<IRepository> IRepositoriesSection.Repositories
-        {
-            get { return Repositories; }
-        }
-    }
-}

src/Umbraco.Core/Configuration/UmbracoSettings/RepositoryConfigExtensions.cs

@@ -1,19 +0,0 @@
-using System;
-using System.Linq;
-
-namespace Umbraco.Core.Configuration.UmbracoSettings
-{
-    public static class RepositoryConfigExtensions
-    {
-        //Our package repo
-        private static readonly Guid RepoGuid = new Guid("65194810-1f85-11dd-bd0b-0800200c9a66");
-
-        public static IRepository GetDefault(this IRepositoriesSection repos)
-        {
-            var found = repos.Repositories.FirstOrDefault(x => x.Id == RepoGuid);
-            if (found == null)
-                throw new InvalidOperationException("No default package repository found with id " + RepoGuid);
-            return found;
-        }
-    }
-}

src/Umbraco.Core/Configuration/UmbracoSettings/RepositoryElement.cs

@@ -1,53 +0,0 @@
-using System;
-using System.Configuration;
-
-namespace Umbraco.Core.Configuration.UmbracoSettings
-{
-    internal class RepositoryElement : ConfigurationElement, IRepository
-    {
-        [ConfigurationProperty("name", IsRequired = true)]
-        public string Name
-        {
-            get { return (string)base["name"]; }
-            set { base["name"] = value; }
-        }
-
-        [ConfigurationProperty("guid", IsRequired = true)]
-        public Guid Id
-        {
-            get { return (Guid)base["guid"]; }
-            set { base["guid"] = value; }
-        }
-
-        [ConfigurationProperty("repositoryurl", DefaultValue = "http://packages.umbraco.org")]
-        public string RepositoryUrl
-        {
-            get { return (string)base["repositoryurl"]; }
-            set { base["repositoryurl"] = value; }
-        }
-
-        [ConfigurationProperty("webserviceurl", DefaultValue = "/umbraco/webservices/api/repository.asmx")]
-        public string WebServiceUrl
-        {
-            get { return (string)base["webserviceurl"]; }
-            set { base["webserviceurl"] = value; }
-        }
-
-        public bool HasCustomWebServiceUrl
-        {
-            get
-            {
-                var prop = Properties["webserviceurl"];
-                return (string) prop.DefaultValue != (string) this[prop];                
-            }
-        }
-
-        [ConfigurationProperty("restapiurl", DefaultValue = "https://our.umbraco.org/webapi/packages/v1")]
-        public string RestApiUrl
-        {
-            get { return (string)base["restapiurl"]; }
-            set { base["restapiurl"] = value; }
-        }
-        
-    }
-}

src/Umbraco.Core/Configuration/UmbracoSettings/UmbracoSettingsSection.cs

@@ -67,50 +67,7 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
         {
             get { return (DistributedCallElement)this["distributedCall"]; }
         }
-
-        private RepositoriesElement _defaultRepositories;
-
-        [ConfigurationProperty("repositories")]
-        internal RepositoriesElement PackageRepositories
-        {
-            get
-            {
-
-                if (_defaultRepositories != null)
-                {
-                    return _defaultRepositories;
-                }
-
-                //here we need to check if this element is defined, if it is not then we'll setup the defaults
-                var prop = Properties["repositories"];
-                var repos = this[prop] as ConfigurationElement;
-                if (repos != null && repos.ElementInformation.IsPresent == false)
-                {
-                    var collection = new RepositoriesCollection
-                        {
-                            new RepositoryElement() {Name = "Umbraco package Repository", Id = new Guid("65194810-1f85-11dd-bd0b-0800200c9a66")}
-                        };
-
-                    
-                    _defaultRepositories = new RepositoriesElement()
-                        {
-                            Repositories = collection
-                        };
-
-                    return _defaultRepositories;
-                }
-
-                //now we need to ensure there is *always* our umbraco repo! its hard coded in the codebase!
-                var reposElement = (RepositoriesElement)base["repositories"];
-                if (reposElement.Repositories.All(x => x.Id != new Guid("65194810-1f85-11dd-bd0b-0800200c9a66")))
-                {
-                    reposElement.Repositories.Add(new RepositoryElement() { Name = "Umbraco package Repository", Id = new Guid("65194810-1f85-11dd-bd0b-0800200c9a66") });                    
-                }
-
-                return reposElement;
-            }
-        }
-
+        
         [ConfigurationProperty("providers")]
         internal ProvidersElement Providers
         {
@@ -185,11 +142,6 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
             get { return DistributedCall; }
         }
 
-        IRepositoriesSection IUmbracoSettingsSection.PackageRepositories
-        {
-            get { return PackageRepositories; }
-        }
-
         IProvidersSection IUmbracoSettingsSection.Providers
         {
             get { return Providers; }

src/Umbraco.Core/Configuration/UmbracoSettings/WebRoutingElement.cs

@@ -1,4 +1,5 @@
-using System.Configuration;
+using System;
+using System.Configuration;
 
 namespace Umbraco.Core.Configuration.UmbracoSettings
 {
@@ -21,6 +22,13 @@ namespace Umbraco.Core.Configuration.UmbracoSettings
         {
             get { return (bool) base["disableAlternativeTemplates"]; }
         }
+
+        [ConfigurationProperty("validateAlternativeTemplates", DefaultValue = "false")]
+        public bool ValidateAlternativeTemplates
+        {
+            get { return (bool)base["validateAlternativeTemplates"]; }
+        }
+
         [ConfigurationProperty("disableFindContentByIdPath", DefaultValue = "false")]
         public bool DisableFindContentByIdPath
         {

src/Umbraco.Core/Configuration/UmbracoVersion.cs

@@ -6,7 +6,7 @@ namespace Umbraco.Core.Configuration
 {
     public class UmbracoVersion
     {
-        private static readonly Version Version = new Version("7.9.2");
+        private static readonly Version Version = new Version("7.14.0");
 
         /// <summary>
         /// Gets the current version of Umbraco.

src/Umbraco.Core/Constants-Applications.cs

@@ -92,7 +92,7 @@
 			/// alias for the dictionary tree.
 			/// </summary>
 			public const string Dictionary = "dictionary";
-
+            
             public const string Stylesheets = "stylesheets";
 
             /// <summary>
@@ -135,4 +135,4 @@
     }
 
    
-}
+}

src/Umbraco.Core/Constants-Conventions.cs

@@ -110,6 +110,11 @@ namespace Umbraco.Core
 				/// Property alias for the Media's file extension.
 				/// </summary>
 				public const string Extension = "umbracoExtension";
+
+				/// <summary>
+				/// The default height/width of an image file if the size can't be determined from the metadata
+				/// </summary>
+				public const int DefaultSize = 200;
 			}
 
 			/// <summary>
@@ -341,7 +346,17 @@ namespace Umbraco.Core
                 /// ContentType alias for default relation type "Relate Parent Document On Delete".
                 /// </summary>
                 public const string RelateParentDocumentOnDeleteAlias = "relateParentDocumentOnDelete";
+
+                /// <summary>
+                /// ContentType name for default relation type "Relate Parent Media Folder On Delete".
+                /// </summary>
+                public const string RelateParentMediaFolderOnDeleteName = "Relate Parent Media Folder On Delete";
+
+                /// <summary>
+                /// ContentType alias for default relation type "Relate Parent Media Folder On Delete".
+                /// </summary>
+                public const string RelateParentMediaFolderOnDeleteAlias = "relateParentMediaFolderOnDelete";
             }
 		}
 	}
-}
+}

src/Umbraco.Core/Constants-PackageRepository.cs

@@ -0,0 +1,15 @@
+namespace Umbraco.Core
+{
+    public static partial class Constants
+    {
+        /// <summary>
+        ///     Defines the constants used for the Umbraco package repository
+        /// </summary>
+        public static class PackageRepository
+        {
+            public const string RestApiBaseUrl = "https://our.umbraco.com/webapi/packages/v1";
+            public const string DefaultRepositoryName = "Umbraco package Repository";
+            public const string DefaultRepositoryId = "65194810-1f85-11dd-bd0b-0800200c9a66";
+        }
+    }
+}

src/Umbraco.Core/Constants-PropertyEditors.cs

@@ -122,6 +122,11 @@ namespace Umbraco.Core
             /// Alias for the Dropdown list, publishing keys datatype.
             /// </summary>
             public const string DropdownlistPublishingKeysAlias = "Umbraco.DropdownlistPublishingKeys";
+            
+            /// <summary>
+            /// Alias for the "new" Dropdown list, that replaces the old four deprecated ones and works as other list based property editors
+            /// </summary>
+            public const string DropDownListFlexibleAlias = "Umbraco.DropDown.Flexible";
 
             /// <summary>
             /// Guid for the Folder browser datatype.
@@ -442,6 +447,11 @@ namespace Umbraco.Core
             /// </summary>
             public const string NestedContentAlias = "Umbraco.NestedContent";
 
+            /// <summary>
+            /// Alias for the multi url picker editor.
+            /// </summary>
+            public const string MultiUrlPickerAlias = "Umbraco.MultiUrlPicker";
+
             public static class PreValueKeys
             {
                 /// <summary>
@@ -452,4 +462,4 @@ namespace Umbraco.Core
             }
         }
 	}
-}
+}

src/Umbraco.Core/Constants-System.cs

@@ -61,6 +61,7 @@
             public const int DefaultContentListViewDataTypeId = -95;
             public const int DefaultMediaListViewDataTypeId = -96;
             public const int DefaultMembersListViewDataTypeId = -97;
+            public const int DefaultLabelDataTypeId = -92;
 
             public const string UmbracoConnectionName = "umbracoDbDSN";
             public const string UmbracoMigrationName = "Umbraco";

src/Umbraco.Core/DatabaseContext.cs

@@ -279,16 +279,34 @@ namespace Umbraco.Core
         {
             get
             {
-                string dbtype = Database.Connection == null ? ProviderName : Database.Connection.GetType().Name;
+                if (Database.Connection == null)
+                {
+                    string dbtype = ProviderName;
 
-                if (dbtype.StartsWith("MySql")) return DatabaseProviders.MySql;
-                if (dbtype.StartsWith("SqlCe") || dbtype.Contains("SqlServerCe")) return DatabaseProviders.SqlServerCE;
-                if (dbtype.StartsWith("Npgsql")) return DatabaseProviders.PostgreSQL;
-                if (dbtype.StartsWith("Oracle") || dbtype.Contains("OracleClient")) return DatabaseProviders.Oracle;
-                if (dbtype.StartsWith("SQLite")) return DatabaseProviders.SQLite;
-                if (dbtype.Contains("Azure")) return DatabaseProviders.SqlAzure;
+                    if (dbtype.StartsWith("MySql")) return DatabaseProviders.MySql;
+                    if (dbtype.StartsWith("SqlCe") || dbtype.Contains("SqlServerCe")) return DatabaseProviders.SqlServerCE;
+                    if (dbtype.StartsWith("Npgsql")) return DatabaseProviders.PostgreSQL;
+                    if (dbtype.StartsWith("Oracle") || dbtype.Contains("OracleClient")) return DatabaseProviders.Oracle;
+                    if (dbtype.StartsWith("SQLite")) return DatabaseProviders.SQLite;
+                    if (dbtype.Contains("Azure")) return DatabaseProviders.SqlAzure;
 
-                return DatabaseProviders.SqlServer;
+                    return DatabaseProviders.SqlServer;
+                }
+                else
+                {
+                    Database.DBType dbType = Database.DatabaseType;
+                    
+                    switch (dbType)
+                    {
+                        case Persistence.Database.DBType.SqlServer: return DatabaseProviders.SqlServer;
+                        case Persistence.Database.DBType.SqlServerCE: return DatabaseProviders.SqlServerCE;
+                        case Persistence.Database.DBType.MySql: return DatabaseProviders.MySql;
+                        case Persistence.Database.DBType.PostgreSQL: return DatabaseProviders.PostgreSQL;
+                        case Persistence.Database.DBType.Oracle: return DatabaseProviders.Oracle;
+                        case Persistence.Database.DBType.SQLite: return DatabaseProviders.SQLite;
+                        default: return (ProviderName.Contains("Azure"))? DatabaseProviders.SqlAzure : DatabaseProviders.SqlServer;
+                    } 
+                }
             }
         }
 
@@ -459,6 +477,22 @@ namespace Umbraco.Core
             var xml = XDocument.Load(fileName, LoadOptions.PreserveWhitespace);
             var connectionstrings = xml.Root.DescendantsAndSelf("connectionStrings").Single();
 
+            // honour configSource, if its set, change the xml file we are saving the configuration
+            // to the one set in the configSource attribute
+            if (connectionstrings.Attribute("configSource") != null)
+            {
+                var source = connectionstrings.Attribute("configSource").Value;
+                var configFile = IOHelper.MapPath(string.Format("{0}/{1}", SystemDirectories.Root, source));
+                LogHelper.Info<DatabaseContext>("storing ConnectionString in {0}", () => configFile);
+                if (System.IO.File.Exists(configFile))
+                {
+                    xml = XDocument.Load(fileName, LoadOptions.PreserveWhitespace);
+                    fileName = configFile; 
+                }
+
+                connectionstrings = xml.Root.DescendantsAndSelf("connectionStrings").Single();
+            }
+
             // Update connectionString if it exists, or else create a new appSetting for the given key and value
             var setting = connectionstrings.Descendants("add").FirstOrDefault(s => s.Attribute("name").Value == Constants.System.UmbracoConnectionName);
             if (setting == null)

src/Umbraco.Core/IO/MediaFileSystem.cs

@@ -1,4 +1,6 @@
-using System;
+using Newtonsoft.Json;
+using Newtonsoft.Json.Linq;
+using System;
 using System.Collections.Generic;
 using System.Drawing;
 using System.Drawing.Drawing2D;
@@ -17,15 +19,15 @@ using Umbraco.Core.Models;
 
 namespace Umbraco.Core.IO
 {
-	/// <summary>
-	/// A custom file system provider for media
-	/// </summary>
-	[FileSystemProvider("media")]
-	public class MediaFileSystem : FileSystemWrapper
-	{
-	    private readonly IContentSection _contentConfig;
+    /// <summary>
+    /// A custom file system provider for media
+    /// </summary>
+    [FileSystemProvider("media")]
+    public class MediaFileSystem : FileSystemWrapper
+    {
+        private readonly IContentSection _contentConfig;
         private readonly UploadAutoFillProperties _uploadAutoFillProperties;
-	    private readonly ILogger _logger;
+        private readonly ILogger _logger;
 
         private readonly object _folderCounterLock = new object();
         private long _folderCounter;
@@ -39,8 +41,8 @@ namespace Umbraco.Core.IO
         };
 
         public MediaFileSystem(IFileSystem wrapped)
-			: this(wrapped, UmbracoConfig.For.UmbracoSettings().Content, ApplicationContext.Current.ProfilingLogger.Logger)
-		{ }
+            : this(wrapped, UmbracoConfig.For.UmbracoSettings().Content, ApplicationContext.Current.ProfilingLogger.Logger)
+        { }
 
         public MediaFileSystem(IFileSystem wrapped, IContentSection contentConfig, ILogger logger)
             : base(wrapped)
@@ -60,13 +62,13 @@ namespace Umbraco.Core.IO
 
         [Obsolete("This low-level method should NOT exist.")]
         public string GetRelativePath(int propertyId, string fileName)
-		{
+        {
             var sep = _contentConfig.UploadAllowDirectories
-				? Path.DirectorySeparatorChar
-				: '-';
+                ? Path.DirectorySeparatorChar
+                : '-';
 
-			return propertyId.ToString(CultureInfo.InvariantCulture) + sep + fileName;
-		}
+            return propertyId.ToString(CultureInfo.InvariantCulture) + sep + fileName;
+        }
 
         [Obsolete("This low-level method should NOT exist.", false)]
         public string GetRelativePath(string subfolder, string fileName)
@@ -264,7 +266,7 @@ namespace Umbraco.Core.IO
             var filename = Path.GetFileName(sourcepath);
             var filepath = GetMediaPath(filename, content.Key, propertyType.Key);
             this.CopyFile(sourcepath, filepath);
-            
+
             return filepath;
         }
 
@@ -293,6 +295,12 @@ namespace Umbraco.Core.IO
         {
             var property = GetProperty(content, propertyTypeAlias);
             var svalue = property.Value as string;
+            if (svalue != null && svalue.DetectIsJson())
+            {
+                // the property value is a JSON serialized image crop data set - grab the "src" property as the file source
+                var jObject = JsonConvert.DeserializeObject<JObject>(svalue);
+                svalue = jObject != null ? jObject.GetValueAsString("src") : svalue;
+            }
             var oldpath = svalue == null ? null : GetRelativePath(svalue);
             var filepath = StoreFile(content, property.PropertyType, filename, filestream, oldpath);
             property.Value = GetUrl(filepath);
@@ -321,7 +329,7 @@ namespace Umbraco.Core.IO
         /// <param name="filepath"></param>
         /// <param name="filestream"></param>
         private void SetUploadFile(IContentBase content, Property property, string filepath, Stream filestream)
-        {            
+        {
             // will use filepath for extension, and filestream for length
             _uploadAutoFillProperties.Populate(content, property.Alias, filepath, filestream);
         }
@@ -357,7 +365,8 @@ namespace Umbraco.Core.IO
             {
                 var jpgInfo = ImageFile.FromStream(stream);
 
-                if (jpgInfo.Format != ImageFileFormat.Unknown
+                if (jpgInfo != null
+                    && jpgInfo.Format != ImageFileFormat.Unknown
                     && jpgInfo.Properties.ContainsKey(ExifTag.PixelYDimension)
                     && jpgInfo.Properties.ContainsKey(ExifTag.PixelXDimension))
                 {
@@ -368,19 +377,20 @@ namespace Umbraco.Core.IO
                         return new Size(width, height);
                     }
                 }
+
+                //we have no choice but to try to read in via GDI
+                using (var image = Image.FromStream(stream))
+                {
+
+                    var fileWidth = image.Width;
+                    var fileHeight = image.Height;
+                    return new Size(fileWidth, fileHeight);
+                }
             }
             catch (Exception)
             {
                 //We will just swallow, just means we can't read exif data, we don't want to log an error either
-            }
-
-            //we have no choice but to try to read in via GDI
-            using (var image = Image.FromStream(stream))
-            {
-
-                var fileWidth = image.Width;
-                var fileHeight = image.Height;
-                return new Size(fileWidth, fileHeight);
+                return new Size(Constants.Conventions.Media.DefaultSize, Constants.Conventions.Media.DefaultSize);
             }
         }
 
@@ -430,8 +440,8 @@ namespace Umbraco.Core.IO
             }
         }
 
-	    public void DeleteMediaFiles(IEnumerable<string> files)
-	    {
+        public void DeleteMediaFiles(IEnumerable<string> files)
+        {
             files = files.Distinct();
 
             Parallel.ForEach(files, file =>

src/Umbraco.Core/IO/SystemDirectories.cs

@@ -203,7 +203,6 @@ namespace Umbraco.Core.IO
         {
             get
             {
-                //by default the packages folder should exist in the data folder
                 return IOHelper.ReturnPath("umbracoPreviewPath", Data + IOHelper.DirSepChar + "preview");
             }
         }

src/Umbraco.Core/IO/SystemFiles.cs

@@ -37,6 +37,7 @@ namespace Umbraco.Core.IO
             }
         }
 
+        [Obsolete("This file is no longer used and should not be accessed!")]
         public static string MetablogConfig
         {
             get

src/Umbraco.Core/Macros/MacroFieldEditorsResolver.cs

@@ -3,10 +3,9 @@ using System.Collections.Generic;
 using System.Linq;
 using System.Web;
 using System.Web.UI;
-using System.Linq;
+using umbraco.interfaces;
 using Umbraco.Core.Logging;
 using Umbraco.Core.ObjectResolution;
-using umbraco.interfaces;
 
 namespace Umbraco.Core.Macros
 {

src/Umbraco.Core/Media/Exif/ImageFile.cs

@@ -2,6 +2,7 @@
 using System.Drawing;
 using System.IO;
 using System.Text;
+using Umbraco.Core.Media.TypeDetector;
 
 namespace Umbraco.Core.Media.Exif
 {
@@ -117,24 +118,28 @@ namespace Umbraco.Core.Media.Exif
         /// <param name="encoding">The encoding to be used for text metadata when the source encoding is unknown.</param>
 		/// <returns>The <see cref="ImageFile"/> created from the file.</returns>
         public static ImageFile FromStream(Stream stream, Encoding encoding)
-		{
-			stream.Seek (0, SeekOrigin.Begin);
-			byte[] header = new byte[8];
-			stream.Seek (0, SeekOrigin.Begin);
-			if (stream.Read (header, 0, header.Length) != header.Length)
-				throw new NotValidImageFileException ();
-			
-			// JPEG
-			if (header[0] == 0xFF && header[1] == 0xD8)
-				return new JPEGFile (stream, encoding);
-			
-			// TIFF
-			string tiffHeader = Encoding.ASCII.GetString (header, 0, 4);
-			if (tiffHeader == "MM\x00\x2a" || tiffHeader == "II\x2a\x00")
-				return new TIFFFile (stream, encoding);
-			
-			throw new NotValidImageFileException ();
-		}
+        {
+            // JPEG
+            if (JPEGDetector.IsOfType(stream))
+            {
+                return new JPEGFile(stream, encoding);
+            }
+
+            // TIFF
+            if (TIFFDetector.IsOfType(stream))
+            {
+                return new TIFFFile(stream, encoding);
+            }
+
+            // SVG
+            if (SVGDetector.IsOfType(stream))
+            {
+                return new SVGFile(stream);
+            }
+
+            // We don't know
+            return null;
+        }
 		#endregion
 	}
 }

src/Umbraco.Core/Media/Exif/ImageFileFormat.cs

@@ -17,5 +17,9 @@
         /// The file is a TIFF File.
         /// </summary>
         TIFF,
+        /// <summary>
+        /// The file is a SVG File.
+        /// </summary>
+        SVG,
     }
 }

src/Umbraco.Core/Media/Exif/SVGFile.cs

@@ -0,0 +1,37 @@
+using System;
+using System.Drawing;
+using System.IO;
+using System.Linq;
+using System.Xml.Linq;
+
+namespace Umbraco.Core.Media.Exif
+{
+    internal class SVGFile : ImageFile
+    {
+        public SVGFile(Stream fileStream)
+        {
+            fileStream.Position = 0;
+
+            var document = XDocument.Load(fileStream); //if it throws an exception the ugly try catch in MediaFileSystem will catch it
+
+            var width = document.Root?.Attributes().Where(x => x.Name == "width").Select(x => x.Value).FirstOrDefault();
+            var height = document.Root?.Attributes().Where(x => x.Name == "height").Select(x => x.Value).FirstOrDefault();
+
+            Properties.Add(new ExifSInt(ExifTag.PixelYDimension,
+                height == null ? Constants.Conventions.Media.DefaultSize : int.Parse(height)));
+            Properties.Add(new ExifSInt(ExifTag.PixelXDimension,
+                width == null ? Constants.Conventions.Media.DefaultSize : int.Parse(width)));
+            
+            Format = ImageFileFormat.SVG;
+        }
+
+        public override void Save(Stream stream)
+        {
+        }
+
+        public override Image ToImage()
+        {
+            throw new NotImplementedException();
+        }
+    }
+}

src/Umbraco.Core/Media/TypeDetector/JpegDetector.cs

@@ -0,0 +1,13 @@
+using System.IO;
+
+namespace Umbraco.Core.Media.TypeDetector
+{
+    public class JPEGDetector : RasterizedTypeDetector
+    {
+        public static bool IsOfType(Stream fileStream)
+        {
+            var header = GetFileHeader(fileStream);
+            return header != null && header[0] == 0xff && header[1] == 0xD8;
+        }
+    }
+}

src/Umbraco.Core/Media/TypeDetector/RasterizedTypeDetector.cs

@@ -0,0 +1,20 @@
+using System.IO;
+
+namespace Umbraco.Core.Media.TypeDetector
+{
+    public abstract class RasterizedTypeDetector
+    {
+        public static byte[] GetFileHeader(Stream fileStream)
+        {
+            fileStream.Seek(0, SeekOrigin.Begin);
+            var header = new byte[8];
+            fileStream.Seek(0, SeekOrigin.Begin);
+
+            // Invalid header
+            if (fileStream.Read(header, 0, header.Length) != header.Length)
+                return null;
+
+            return header;
+        }
+    }
+}

src/Umbraco.Core/Media/TypeDetector/SVGDetector.cs

@@ -0,0 +1,24 @@
+using System.IO;
+using System.Xml.Linq;
+
+namespace Umbraco.Core.Media.TypeDetector
+{
+    public class SVGDetector
+    {
+        public static bool IsOfType(Stream fileStream)
+        {
+            var document = new XDocument();
+
+            try
+            {
+                document = XDocument.Load(fileStream);
+            }
+            catch (System.Exception ex)
+            {
+                return false;
+            }
+
+            return document.Root?.Name.LocalName == "svg";
+        }
+    }
+}

src/Umbraco.Core/Media/TypeDetector/TIFFDetector.cs

@@ -0,0 +1,24 @@
+using System.IO;
+using System.Text;
+
+namespace Umbraco.Core.Media.TypeDetector
+{
+    public class TIFFDetector
+    {
+        public static bool IsOfType(Stream fileStream)
+        {
+            var tiffHeader = GetFileHeader(fileStream);
+            return tiffHeader != null && tiffHeader == "MM\x00\x2a" || tiffHeader == "II\x2a\x00";
+        }
+
+        public static string GetFileHeader(Stream fileStream)
+        {
+            var header = RasterizedTypeDetector.GetFileHeader(fileStream);
+            if (header == null)
+                return null;
+
+            var tiffHeader = Encoding.ASCII.GetString(header, 0, 4);
+            return tiffHeader;
+        }
+    }
+}

src/Umbraco.Core/Models/ContentType.cs

@@ -102,6 +102,28 @@ namespace Umbraco.Core.Models
             }
         }
 
+        /// <summary>
+        /// Determines if AllowedTemplates contains templateId
+        /// </summary>
+        /// <param name="templateId">The template id to check</param>
+        /// <returns>True if AllowedTemplates contains the templateId else False</returns>
+        public bool IsAllowedTemplate(int templateId)
+        {
+            var allowedTemplates = AllowedTemplates ?? new ITemplate[0];
+            return allowedTemplates.Any(t => t.Id == templateId);
+        }
+
+        /// <summary>
+        /// Determines if AllowedTemplates contains templateId
+        /// </summary>
+        /// <param name="templateAlias">The template alias to check</param>
+        /// <returns>True if AllowedTemplates contains the templateAlias else False</returns>
+        public bool IsAllowedTemplate(string templateAlias)
+        {
+            var allowedTemplates = AllowedTemplates ?? new ITemplate[0];
+            return allowedTemplates.Any(t => t.Alias.Equals(templateAlias, StringComparison.InvariantCultureIgnoreCase));
+        }
+
         /// <summary>
         /// Sets the default template for the ContentType
         /// </summary>

src/Umbraco.Core/Models/IContentType.cs

@@ -17,6 +17,20 @@ namespace Umbraco.Core.Models
         /// </summary>
         IEnumerable<ITemplate> AllowedTemplates { get; set; }
 
+        /// <summary>
+        /// Determines if AllowedTemplates contains templateId
+        /// </summary>
+        /// <param name="templateId">The template id to check</param>
+        /// <returns>True if AllowedTemplates contains the templateId else False</returns>
+        bool IsAllowedTemplate(int templateId);
+
+        /// <summary>
+        /// Determines if AllowedTemplates contains templateId
+        /// </summary>
+        /// <param name="templateAlias">The template alias to check</param>
+        /// <returns>True if AllowedTemplates contains the templateAlias else False</returns>
+        bool IsAllowedTemplate(string templateAlias);
+
         /// <summary>
         /// Sets the default template for the ContentType
         /// </summary>

src/Umbraco.Core/Models/IContentTypeBase.cs

@@ -21,7 +21,12 @@ namespace Umbraco.Core.Models
         string Description { get; set; }
 
         /// <summary>
-        /// Gets or Sets the Icon for the ContentType
+        /// Gets or sets the icon for the content type. The value is a CSS class name representing
+        /// the icon (eg. <c>icon-home</c>) along with an optional CSS class name representing the
+        /// color (eg. <c>icon-blue</c>). Put together, the value for this scenario would be
+        /// <c>icon-home color-blue</c>.
+        /// 
+        /// If a class name for the color isn't specified, the icon color will default to black.
         /// </summary>
         string Icon { get; set; }
 
@@ -119,4 +124,4 @@ namespace Umbraco.Core.Models
         /// <returns></returns>
         bool MovePropertyType(string propertyTypeAlias, string propertyGroupName);
     }
-}
+}

src/Umbraco.Core/Models/Identity/BackOfficeIdentityUser.cs

@@ -120,13 +120,22 @@ namespace Umbraco.Core.Models.Identity
             set { _tracker.SetPropertyValueAndDetectChanges(value, ref _userName, Ps.Value.UserNameSelector); }
         }
 
+        /// <summary>
+        /// LastPasswordChangeDateUtc so we can track changes to it
+        /// </summary>
+        public override DateTime? LastPasswordChangeDateUtc
+        {
+            get { return _lastPasswordChangeDateUtc; }
+            set { _tracker.SetPropertyValueAndDetectChanges(value, ref _lastPasswordChangeDateUtc, Ps.Value.LastPasswordChangeDateUtcSelector); }
+        }
+
         /// <summary>
         /// Override LastLoginDateUtc so we can track changes to it
         /// </summary>
         public override DateTime? LastLoginDateUtc
         {
             get { return _lastLoginDateUtc; }
-            set { _tracker.SetPropertyValueAndDetectChanges(value, ref _lastLoginDateUtc, Ps.Value.LastLoginDateUtcSelector); }            
+            set { _tracker.SetPropertyValueAndDetectChanges(value, ref _lastLoginDateUtc, Ps.Value.LastLoginDateUtcSelector); }
         }
 
         /// <summary>
@@ -392,6 +401,7 @@ namespace Umbraco.Core.Models.Identity
             public readonly PropertyInfo EmailSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, string>(x => x.Email);
             public readonly PropertyInfo UserNameSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, string>(x => x.UserName);
             public readonly PropertyInfo LastLoginDateUtcSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, DateTime?>(x => x.LastLoginDateUtc);
+            public readonly PropertyInfo LastPasswordChangeDateUtcSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, DateTime?>(x => x.LastPasswordChangeDateUtc);
             public readonly PropertyInfo EmailConfirmedSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, bool>(x => x.EmailConfirmed);
             public readonly PropertyInfo NameSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, string>(x => x.Name);
             public readonly PropertyInfo AccessFailedCountSelector = ExpressionHelper.GetPropertyInfo<BackOfficeIdentityUser, int>(x => x.AccessFailedCount);
@@ -419,6 +429,7 @@ namespace Umbraco.Core.Models.Identity
         private int _id;
         private bool _hasIdentity = false;
         private DateTime? _lastLoginDateUtc;
+        private DateTime? _lastPasswordChangeDateUtc;
         private bool _emailConfirmed;
         private string _name;
         private int _accessFailedCount;
@@ -449,4 +460,4 @@ namespace Umbraco.Core.Models.Identity
 
 
     }
-}
+}

src/Umbraco.Core/Models/Identity/IdentityModelMappings.cs

@@ -19,6 +19,7 @@ namespace Umbraco.Core.Models.Identity
                 })
                 .ConstructUsing(user => new BackOfficeIdentityUser(user.Id, user.Groups))
                 .ForMember(user => user.LastLoginDateUtc, expression => expression.MapFrom(user => user.LastLoginDate.ToUniversalTime()))
+                .ForMember(user => user.LastPasswordChangeDateUtc, expression => expression.MapFrom(user => user.LastPasswordChangeDate.ToUniversalTime()))
                 .ForMember(user => user.Email, expression => expression.MapFrom(user => user.Email))
                 .ForMember(user => user.EmailConfirmed, expression => expression.MapFrom(user => user.EmailConfirmedDate.HasValue))
                 .ForMember(user => user.Id, expression => expression.MapFrom(user => user.Id))

src/Umbraco.Core/Models/Identity/IdentityUser.cs

@@ -83,6 +83,12 @@ namespace Umbraco.Core.Models.Identity
         /// </summary>
         public virtual DateTime? LockoutEndDateUtc { get; set; }
 
+        /// <summary>
+        /// DateTime in UTC when the password was last changed.
+        /// 
+        /// </summary>
+        public virtual DateTime? LastPasswordChangeDateUtc { get; set; }
+
         /// <summary>
         /// Is lockout enabled for this user
         /// 
@@ -127,4 +133,4 @@ namespace Umbraco.Core.Models.Identity
 
         
     }
-}
+}

src/Umbraco.Core/Models/Membership/User.cs

@@ -259,7 +259,7 @@ namespace Umbraco.Core.Models.Membership
         {
             get
             {
-                if (LastLoginDate == default(DateTime) && IsApproved == false && InvitedDate != null)
+                if (LastLoginDate == default && IsApproved == false && InvitedDate != null)
                     return UserState.Invited;
 
                 if (IsLockedOut)
@@ -267,7 +267,11 @@ namespace Umbraco.Core.Models.Membership
                 if (IsApproved == false)
                     return UserState.Disabled;
 
-                return UserState.Active;
+                // User is not disabled or locked and has never logged in before
+                if (LastLoginDate == default && IsApproved && IsLockedOut == false)
+                    return UserState.Inactive;
+
+                    return UserState.Active;
             }
         }
 

src/Umbraco.Core/Models/Membership/UserState.cs

@@ -9,6 +9,7 @@
         Active = 0,
         Disabled = 1,
         LockedOut = 2,
-        Invited = 3
+        Invited = 3,
+        Inactive = 4
     }
-}
+}

src/Umbraco.Core/Models/Property.cs

@@ -83,7 +83,7 @@ namespace Umbraco.Core.Models
         /// <summary>
         /// Returns the instance of the tag support, by default tags are not enabled
         /// </summary>
-        internal PropertyTags TagSupport
+        public PropertyTags TagSupport
         {
             get { return _tagSupport; }
         }
@@ -242,4 +242,4 @@ namespace Umbraco.Core.Models
             return clone;
         }
     }
-}
+}

src/Umbraco.Core/Models/PropertyTagBehavior.cs

@@ -1,9 +1,9 @@
 namespace Umbraco.Core.Models
 {
-    internal enum PropertyTagBehavior
+    public enum PropertyTagBehavior
     {
         Replace,
         Remove,
         Merge
     }
-}
+}

src/Umbraco.Core/Models/PropertyTags.cs

@@ -6,7 +6,7 @@ namespace Umbraco.Core.Models
     /// <summary>
     /// A property extension class that allows us to enable tags for any given property
     /// </summary>
-    internal class PropertyTags
+    public class PropertyTags
     {
         public PropertyTags()
         {
@@ -33,4 +33,4 @@ namespace Umbraco.Core.Models
         public IEnumerable<Tuple<string, string>> Tags { get; set; }
 
     }
-}
+}

src/Umbraco.Core/Models/PublishedContent/PublishedContentType.cs

@@ -25,6 +25,8 @@ namespace Umbraco.Core.Models.PublishedContent
         {
             Id = contentType.Id;
             Alias = contentType.Alias;
+            Name = contentType.Name;
+            Description = contentType.Description;
             _compositionAliases = new HashSet<string>(contentType.CompositionAliases(), StringComparer.InvariantCultureIgnoreCase);
             _propertyTypes = contentType.CompositionPropertyTypes
                 .Select(x => new PublishedPropertyType(this, x))
@@ -33,10 +35,12 @@ namespace Umbraco.Core.Models.PublishedContent
         }
 
         // internal so it can be used for unit tests
-        internal PublishedContentType(int id, string alias, IEnumerable<string> compositionAliases, IEnumerable<PublishedPropertyType> propertyTypes)
+        internal PublishedContentType(int id, string alias, string name, string description, IEnumerable<string> compositionAliases, IEnumerable<PublishedPropertyType> propertyTypes)
         {
             Id = id;
             Alias = alias;
+            Name = name;
+            Description = description;
             _compositionAliases = new HashSet<string>(compositionAliases, StringComparer.InvariantCultureIgnoreCase);
             _propertyTypes = propertyTypes.ToArray();
             foreach (var propertyType in _propertyTypes)
@@ -46,7 +50,7 @@ namespace Umbraco.Core.Models.PublishedContent
 
         // create detached content type - ie does not match anything in the DB
         internal PublishedContentType(string alias, IEnumerable<string> compositionAliases, IEnumerable<PublishedPropertyType> propertyTypes)
-            : this(0, alias, compositionAliases, propertyTypes)
+            : this(0, alias, string.Empty, string.Empty, compositionAliases, propertyTypes)
         { }
 
         private void InitializeIndexes()
@@ -63,6 +67,8 @@ namespace Umbraco.Core.Models.PublishedContent
 
         public int Id { get; private set; }
         public string Alias { get; private set; }
+        public string Name { get; private set; }
+        public string Description { get; private set; }
         public HashSet<string> CompositionAliases { get { return _compositionAliases; } }
 
         #endregion

src/Umbraco.Core/Models/Rdbms/ConsentDto.cs

@@ -39,6 +39,7 @@ namespace Umbraco.Core.Models.Rdbms
         public int State { get; set; }
 
         [Column("comment")]
+        [NullSetting(NullSetting = NullSettings.Null)]
         public string Comment { get; set; }
     }
 }

src/Umbraco.Core/Models/Rdbms/LanguageDto.cs

@@ -15,7 +15,7 @@ namespace Umbraco.Core.Models.Rdbms
         [Column("languageISOCode")]
         [Index(IndexTypes.UniqueNonClustered)]
         [NullSetting(NullSetting = NullSettings.Null)]
-        [Length(10)]
+        [Length(14)]
         public string IsoCode { get; set; }
 
         [Column("languageCultureName")]
@@ -23,4 +23,4 @@ namespace Umbraco.Core.Models.Rdbms
         [Length(100)]
         public string CultureName { get; set; }
     }
-}
+}

src/Umbraco.Core/Models/Rdbms/RelationTypeDto.cs

@@ -9,7 +9,7 @@ namespace Umbraco.Core.Models.Rdbms
     [ExplicitColumns]
     internal class RelationTypeDto
     {
-        public const int NodeIdSeed = 3;
+        public const int NodeIdSeed = 4;
 
         [Column("id")]
         [PrimaryKeyColumn(IdentitySeed = NodeIdSeed)]

src/Umbraco.Core/Models/UserExtensions.cs

@@ -3,6 +3,7 @@ using System.Collections.Generic;
 using System.Globalization;
 using System.Linq;
 using System.Net;
+using System.Security.Cryptography;
 using Umbraco.Core.Cache;
 using Umbraco.Core.Configuration;
 using Umbraco.Core.IO;
@@ -35,9 +36,12 @@ namespace Umbraco.Core.Models
         /// A list of 5 different sized avatar URLs
         /// </returns>
         internal static string[] GetUserAvatarUrls(this IUser user, ICacheProvider staticCache)
-        {
-            //check if the user has explicitly removed all avatars including a gravatar, this will be possible and the value will be "none"
-            if (user.Avatar == "none")
+        {
+            // If FIPS is required, never check the Gravatar service as it only supports MD5 hashing.  
+            // Unfortunately, if the FIPS setting is enabled on Windows, using MD5 will throw an exception
+            // and the website will not run.
+            // Also, check if the user has explicitly removed all avatars including a gravatar, this will be possible and the value will be "none"
+            if (user.Avatar == "none" || CryptoConfig.AllowOnlyFipsAlgorithms)
             {
                 return new string[0];
             }

src/Umbraco.Core/ObjectExtensions.cs

@@ -140,8 +140,7 @@ namespace Umbraco.Core
                     if (underlying != null)
                     {
                         // Special case for empty strings for bools/dates which should return null if an empty string.
-                        var inputString = input as string;
-                        if (inputString != null)
+                        if (input is string inputString)
                         {
                             //TODO: Why the check against only bool/date when a string is null/empty? In what scenario can we convert to another type when the string is null or empty other than just being null?
                             if (string.IsNullOrEmpty(inputString) && (underlying == typeof(DateTime) || underlying == typeof(bool)))
@@ -168,8 +167,7 @@ namespace Umbraco.Core
                 {
                     // target is not a generic type
 
-                    var inputString = input as string;
-                    if (inputString != null)
+                    if (input is string inputString)
                     {
                         // Try convert from string, returns an Attempt if the string could be
                         // processed (either succeeded or failed), else null if we need to try
@@ -218,8 +216,7 @@ namespace Umbraco.Core
                 }
 
                 // Re-check convertables since we altered the input through recursion
-                var convertible2 = input as IConvertible;
-                if (convertible2 != null)
+                if (input is IConvertible convertible2)
                 {
                     return Attempt.Succeed(Convert.ChangeType(convertible2, target));
                 }
@@ -277,8 +274,7 @@ namespace Umbraco.Core
             {
                 if (target == typeof(int))
                 {
-                    int value;
-                    if (int.TryParse(input, out value))
+                    if (int.TryParse(input, out var value))
                     {
                         return Attempt<object>.Succeed(value);
                     }
@@ -286,30 +282,26 @@ namespace Umbraco.Core
                     // Because decimal 100.01m will happily convert to integer 100, it
                     // makes sense that string "100.01" *also* converts to integer 100.
                     var input2 = NormalizeNumberDecimalSeparator(input);
-                    decimal value2;
-                    return Attempt<object>.SucceedIf(decimal.TryParse(input2, out value2), Convert.ToInt32(value2));
+                    return Attempt<object>.SucceedIf(decimal.TryParse(input2, out var value2), Convert.ToInt32(value2));
                 }
 
                 if (target == typeof(long))
                 {
-                    long value;
-                    if (long.TryParse(input, out value))
+                    if (long.TryParse(input, out var value))
                     {
                         return Attempt<object>.Succeed(value);
                     }
 
                     // Same as int
                     var input2 = NormalizeNumberDecimalSeparator(input);
-                    decimal value2;
-                    return Attempt<object>.SucceedIf(decimal.TryParse(input2, out value2), Convert.ToInt64(value2));
+                    return Attempt<object>.SucceedIf(decimal.TryParse(input2, out var value2), Convert.ToInt64(value2));
                 }
 
                 // TODO: Should we do the decimal trick for short, byte, unsigned?
 
                 if (target == typeof(bool))
                 {
-                    bool value;
-                    if (bool.TryParse(input, out value))
+                    if (bool.TryParse(input, out var value))
                     {
                         return Attempt<object>.Succeed(value);
                     }
@@ -322,53 +314,42 @@ namespace Umbraco.Core
                 switch (Type.GetTypeCode(target))
                 {
                     case TypeCode.Int16:
-                        short value;
-                        return Attempt<object>.SucceedIf(short.TryParse(input, out value), value);
+                        return Attempt<object>.SucceedIf(short.TryParse(input, out var value), value);
 
                     case TypeCode.Double:
                         var input2 = NormalizeNumberDecimalSeparator(input);
-                        double valueD;
-                        return Attempt<object>.SucceedIf(double.TryParse(input2, out valueD), valueD);
+                        return Attempt<object>.SucceedIf(double.TryParse(input2, out var valueD), valueD);
 
                     case TypeCode.Single:
                         var input3 = NormalizeNumberDecimalSeparator(input);
-                        float valueF;
-                        return Attempt<object>.SucceedIf(float.TryParse(input3, out valueF), valueF);
+                        return Attempt<object>.SucceedIf(float.TryParse(input3, out var valueF), valueF);
 
                     case TypeCode.Char:
-                        char valueC;
-                        return Attempt<object>.SucceedIf(char.TryParse(input, out valueC), valueC);
+                        return Attempt<object>.SucceedIf(char.TryParse(input, out var valueC), valueC);
 
                     case TypeCode.Byte:
-                        byte valueB;
-                        return Attempt<object>.SucceedIf(byte.TryParse(input, out valueB), valueB);
+                        return Attempt<object>.SucceedIf(byte.TryParse(input, out var valueB), valueB);
 
                     case TypeCode.SByte:
-                        sbyte valueSb;
-                        return Attempt<object>.SucceedIf(sbyte.TryParse(input, out valueSb), valueSb);
+                        return Attempt<object>.SucceedIf(sbyte.TryParse(input, out var valueSb), valueSb);
 
                     case TypeCode.UInt32:
-                        uint valueU;
-                        return Attempt<object>.SucceedIf(uint.TryParse(input, out valueU), valueU);
+                        return Attempt<object>.SucceedIf(uint.TryParse(input, out var valueU), valueU);
 
                     case TypeCode.UInt16:
-                        ushort valueUs;
-                        return Attempt<object>.SucceedIf(ushort.TryParse(input, out valueUs), valueUs);
+                        return Attempt<object>.SucceedIf(ushort.TryParse(input, out var valueUs), valueUs);
 
                     case TypeCode.UInt64:
-                        ulong valueUl;
-                        return Attempt<object>.SucceedIf(ulong.TryParse(input, out valueUl), valueUl);
+                        return Attempt<object>.SucceedIf(ulong.TryParse(input, out var valueUl), valueUl);
                 }
             }
             else if (target == typeof(Guid))
             {
-                Guid value;
-                return Attempt<object>.SucceedIf(Guid.TryParse(input, out value), value);
+                return Attempt<object>.SucceedIf(Guid.TryParse(input, out var value), value);
             }
             else if (target == typeof(DateTime))
             {
-                DateTime value;
-                if (DateTime.TryParse(input, out value))
+                if (DateTime.TryParse(input, out var value))
                 {
                     switch (value.Kind)
                     {
@@ -388,24 +369,20 @@ namespace Umbraco.Core
             }
             else if (target == typeof(DateTimeOffset))
             {
-                DateTimeOffset value;
-                return Attempt<object>.SucceedIf(DateTimeOffset.TryParse(input, out value), value);
+                return Attempt<object>.SucceedIf(DateTimeOffset.TryParse(input, out var value), value);
             }
             else if (target == typeof(TimeSpan))
             {
-                TimeSpan value;
-                return Attempt<object>.SucceedIf(TimeSpan.TryParse(input, out value), value);
+                return Attempt<object>.SucceedIf(TimeSpan.TryParse(input, out var value), value);
             }
             else if (target == typeof(decimal))
             {
                 var input2 = NormalizeNumberDecimalSeparator(input);
-                decimal value;
-                return Attempt<object>.SucceedIf(decimal.TryParse(input2, out value), value);
+                return Attempt<object>.SucceedIf(decimal.TryParse(input2, out var value), value);
             }
             else if (input != null && target == typeof(Version))
             {
-                Version value;
-                return Attempt<object>.SucceedIf(Version.TryParse(input, out value), value);
+                return Attempt<object>.SucceedIf(Version.TryParse(input, out var value), value);
             }
 
             // E_NOTIMPL IPAddress, BigInteger
@@ -690,8 +667,7 @@ namespace Umbraco.Core
         {
             var key = new CompositeTypeTypeKey(source, target);
 
-            TypeConverter typeConverter;
-            if (InputTypeConverterCache.TryGetValue(key, out typeConverter))
+            if (InputTypeConverterCache.TryGetValue(key, out TypeConverter typeConverter))
             {
                 return typeConverter;
             }
@@ -711,8 +687,7 @@ namespace Umbraco.Core
         {
             var key = new CompositeTypeTypeKey(source, target);
 
-            TypeConverter typeConverter;
-            if (DestinationTypeConverterCache.TryGetValue(key, out typeConverter))
+            if (DestinationTypeConverterCache.TryGetValue(key, out TypeConverter typeConverter))
             {
                 return typeConverter;
             }
@@ -730,8 +705,7 @@ namespace Umbraco.Core
         [MethodImpl(MethodImplOptions.AggressiveInlining)]
         private static Type GetCachedGenericNullableType(Type type)
         {
-            Type underlyingType;
-            if (NullableGenericCache.TryGetValue(type, out underlyingType))
+            if (NullableGenericCache.TryGetValue(type, out Type underlyingType))
             {
                 return underlyingType;
             }
@@ -750,8 +724,7 @@ namespace Umbraco.Core
         private static bool GetCachedCanAssign(object input, Type source, Type target)
         {
             var key = new CompositeTypeTypeKey(source, target);
-            bool canConvert;
-            if (AssignableTypeCache.TryGetValue(key, out canConvert))
+            if (AssignableTypeCache.TryGetValue(key, out bool canConvert))
             {
                 return canConvert;
             }
@@ -770,8 +743,7 @@ namespace Umbraco.Core
         [MethodImpl(MethodImplOptions.AggressiveInlining)]
         private static bool GetCachedCanConvertToBoolean(Type type)
         {
-            bool result;
-            if (BoolConvertCache.TryGetValue(type, out result))
+            if (BoolConvertCache.TryGetValue(type, out bool result))
             {
                 return result;
             }

src/Umbraco.Core/Packaging/Models/PackageAction.cs

@@ -27,7 +27,7 @@ namespace Umbraco.Core.Packaging.Models
             set { _runAt = value; }
         }
 
-        public bool Undo //NOTE: Should thid default to "False"? but the documentation says default "True" (http://our.umbraco.org/wiki/reference/packaging/package-actions)
+        public bool Undo //NOTE: Should thid default to "False"? but the documentation says default "True" (https://our.umbraco.com/wiki/reference/packaging/package-actions)
         {
             get { return _undo ?? true; }
             set { _undo = value; }

src/Umbraco.Core/Persistence/DatabaseModelDefinitions/ConstraintDefinition.cs

@@ -6,17 +6,17 @@ namespace Umbraco.Core.Persistence.DatabaseModelDefinitions
     {
         public ConstraintDefinition(ConstraintType type)
         {
-            constraintType = type;
+            _constraintType = type;
         }
 
-        private ConstraintType constraintType;
-        public bool IsPrimaryKeyConstraint { get { return ConstraintType.PrimaryKey == constraintType; } }
-        public bool IsUniqueConstraint { get { return ConstraintType.Unique == constraintType; } }
-        public bool IsNonUniqueConstraint { get { return ConstraintType.NonUnique == constraintType; } }
+        private readonly ConstraintType _constraintType;
+        public bool IsPrimaryKeyConstraint => ConstraintType.PrimaryKey == _constraintType;
+        public bool IsUniqueConstraint => ConstraintType.Unique == _constraintType;
+        public bool IsNonUniqueConstraint => ConstraintType.NonUnique == _constraintType;
 
         public string SchemaName { get; set; }
         public string ConstraintName { get; set; }
         public string TableName { get; set; }
         public ICollection<string> Columns = new HashSet<string>();
     }
-}
+}

src/Umbraco.Core/Persistence/DatabaseModelDefinitions/DbIndexDefinition.cs

@@ -1,3 +1,5 @@
+using System;
+
 namespace Umbraco.Core.Persistence.DatabaseModelDefinitions
 {
     /// <summary>
@@ -5,9 +7,17 @@ namespace Umbraco.Core.Persistence.DatabaseModelDefinitions
     /// </summary>
     internal class DbIndexDefinition
     {
-        public virtual string IndexName { get; set; }
-        public virtual string TableName { get; set; }
-        public virtual string ColumnName { get; set; }
-        public virtual bool IsUnique { get; set; }
+        public DbIndexDefinition(Tuple<string, string, string, bool> data)
+        {
+            TableName = data.Item1;
+            IndexName = data.Item2;
+            ColumnName = data.Item3;
+            IsUnique = data.Item4;
+        }
+
+        public string IndexName { get; }
+        public string TableName { get; }
+        public string ColumnName { get; }
+        public bool IsUnique { get; }
     }
-}
+}

src/Umbraco.Core/Persistence/DatabaseModelDefinitions/DefinitionFactory.cs

@@ -158,9 +158,7 @@ namespace Umbraco.Core.Persistence.DatabaseModelDefinitions
                                      Name = indexName,
                                      IndexType = attribute.IndexType,
                                      ColumnName = columnName,
-                                     TableName = tableName,
-                                     IsClustered = attribute.IndexType == IndexTypes.Clustered,
-                                     IsUnique = attribute.IndexType == IndexTypes.UniqueNonClustered
+                                     TableName = tableName,                                                                     
                                  };
 
             if (string.IsNullOrEmpty(attribute.ForColumns) == false)
@@ -174,4 +172,4 @@ namespace Umbraco.Core.Persistence.DatabaseModelDefinitions
             return definition;
         }
     }
-}
+}